Fr0d

Just found it, thanks.

It seems that 390 on the Skoda Update portal is corrupt. All of the below files fail to unzip. Finland_Basic.psf navigation_styles_BY_EU.iso Belguim.iso France.iso Germany.iso Italy.iso Poland.iso Portugal.iso Russia.iso Sweden.iso Turkey.iso catergories_bg_bg.tsf catergories_cs_cz.tsf catergories_es_es.tsf catergories_pt_pt.tsf catergories_ro_ro.tsf catergories_sk_sk.tsf catergories_tr_tr.tsf I've downloaded twice, and both zips are bad. I suppose copying the missing files from my 350 install is a no-no? Fr0d

There are quite a few on eBay, many under a tenner. Mine broke ages ago so I just bought one. It absolutely didn't fit out of the box and required copious amounts of filing of the door to accommodate. It now sort of shuts, but I wouldn't trust it under heavy use in the slightest. Caveat emptor...

Well, I inspected the wiring looms both sides and saw nothing amiss. Put everything back together and so far the tailgate appears to work fine. Just performed another diagnostic test and lo and behold, no errors. I wonder if reports of the tailgate occasionally losing track of its position may be applicable here?

Hi All, Looks like one or both of the tailgate struts are starting to fail on my 2015 Combi. Randomly, it opens as normal, followed by a series of rapid beeps at the end. To close it, I have to forcefully pull the tailgate down. An OBD2 diagnostic scan of the tailgate reads: 00028 [0x00001C] Archive (inactive) B11D913: Rear lid motor 1, Open circuit Motor 1 für Heckklappe Unterbrechung B120A02: Hall sensor in motor 2 for rear hatch, Signal error Hall sensor in motor 2 for rear hatch Signal error Status bits: 1 Priority: 4 Frequency: 3 Unlearning index: 141 Should I check the condition of the wires in both struts, as depicted HERE, or take a look at the microswitches (where are they?)? Failing that, are the eBay replacements viable? Thanks!

Seems I have an Mib2 high (Colombus with SSD jukebox), but no OBDEleven or VCDS. I only have Car Scanner Pro. Without trawling through 26 pages, is there a way to modify my existing Satnav files to fix this bug (either editing 15 to 14 or 32783 to 32782), or do I have to find someone with the above scanners to do it for me? Mods - As there appears to be a workaround, a sticky with clear instructions would probably be a good idea. Cheers!

Mine's gone kaput too.

No, I don't have DCC. So there's no specific self leveling shocks needed then. Thanks.

Seem my rear shocks are on the way out. Is there any way to say what kind of shocks I have? 2.0TDI MY15 CR150 4X4 COMBI ECP gives me with "electronic suspension control" but what is this? Self-levelling, DCC or something else? They cost several times as much as regular shocks, and I don't know if I need them. Cheers

I traded my MK2 Octy vrs in for an S3 a few years ago and was wondering if the climate switch modification still works? Yes, entirely different car but the controls look similar.