Dean

Unsure on pre-face list 98/99 models. If you do have them. Press and hold the down button for 10 seconds and then press up for 10 seconds also to shut the window. This resets the ccm module if you have this feature enabled.

Getting there. Next would be sitting inside while someone poors water over door and bonnet/screen to see if can be seen coming into the cabin.

Welcome to the Edition 100 ownership. 😌

I was thinking of getting made by a company. However I now need a drivers wing as it’s rotten.

Tip for that but be careful. Get your palm and place it on the spring side of the arm. Push down repeatedly softly and this should be enough to dislodge it without a puller. Passenger side where the bonnet wire would be for a lhd. Sometimes the bung is missing there. But also check the bottom wire on the right side and ensure the bung is tight or it all leaks to the carpet.

Is this for the MK1 shape. Or, the MK2 shape?

Door seals. If they've perished over time the door doesn't seal correctly and water trickles down and sits on the sill and pours into the carpet. Another one, which I have actually just done, is the bungs under the car. If they are missing, water is splashed up and soaks the underlay. Double check the scuttle and make sure the bung is there to stop water leaking directly into the cabin. As for wet vaccing. It'll help, but you'll need to lift the carpet and remove the underlay and thoroughly dry it out as its like a sponge...

@Octavia47 Are you on any of the MK1 Oct Groups on FB? If so, there are a few people who break them weekly. They'll have the parts needed and more. Look for Gav, I'm sure many others will state that hard parts too. Link Buy as many as you can. I think I have roughly 2 sets from breaking my own over the years, and it's been fortunate that I have to say the least.

How is this going??

Was trying to find the car, but all my searching has surfaced nothing. All the old sites I used for check plates, etc has closed. So, I cannot see retention plates, or reg changes.

OK, this is now fixed. However, it is a perk of being a FULL MEMBER. Not a 'Find my way'. There is a minimum of 49 posts which are required to enable this setting. Also, FREEDOM gets this perk too along with other increased profile settings. A word of warning; any images attached to older posts will be deleted and break the flow of the topic. So, be mindful what you're deleting.

I'll check the settings to make sure everything is set correctly.

Wow, that's done a proper job melting that!

Excellent work, got a photo of it all finished?

Does this come through the interior light too?