Skip to content

CormacVrs

Finding my way
  • Joined

  • Last visited

  1. I changed the cambelt and water pump at home a few years ago on my vrs tdi, wasnt really too complicated, plenty of videos on youtube from start to finish. Had the engine resting on a trolley jack when i removed the engine mount, hardest bit was probably lining the engine mount back up with the car when your doing it yourself, might be easier having an engine support bar on top rather that the trolley jack. Id have no issues recommending anyone doing it themselves all you need is a good set of tools
  2. Hi AV8 Its the blue connector top right of pic and as Warrior says its connected in the glove box unit and not the HMI pic radio.jfif
  3. Hi JakubN I'm sure you did this but did you check adaptions in Control unit 5F, then Car function Adaptions Gen 2 and activate the Menu display pdc? Can you remember which settings you needed to change to get the drive button selection on screen as i have the same issue
  4. Ah it was just a pic of where too cut but if you compare it to the one that came off you’ll see
  5. You just need to dremel the plastic lugs off beside the temperature display and it will fit no problem Hvac.docx
  6. Same issue happened to me on my 2015 vrs, replaced the fan and it worked for a week or so and now the issue is back
  7. https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash Ask in the discussion page there, someone will help you out
  8. Can you post a link to the ambient kit you bought, so I can see how it’s wired.
  9. By seals do you mean door cards? If you want the wires hidden you’re going to have to remove the door cards. I don’t know what way your aftermarket lights fit but I’m assuming they squeeze into the gaps on the door.
  10. I done mine last weekend, first time I done one. If you have a couple of trolley jacks and the right tools, torque wrench, locking tools and plenty of patience, it’s doable. Just all depends on how confident you are in your skills.
  11. I wired mine into the footwell lights and they work no problem Cormac
  12. Yeah there’s no difference between them
  13. superskoda or kopacek as its now called is where most people buy them, a bit expensive but the quality is 100%
  14. Theres an earth point just under the carpet on the door sill about 3 inches towards the rear from the bonnet latch.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.