Lutz_91

Fake Chrom Heck 😅 ... Original from the Facelift is better.

Is there any animation news here? Has anyone ever flashed the BCM? For me it is only possible to open it so far, otherwise all functions are fully available. The dynamic indicator also works correctly. Only the animation when locking is not available and the light simply goes out.

So with the Octavia it fits and since the plastic lining is the same on the Superb, it should also fit there. If necessary, adjust the cutout with a file. In your picture, you want to mount the button in the sheet metal, that can't work either.

Ja, geht durch den Kunststoff durch.

The picture with the number 22 does not belong to the EasyOpen, even if it is shown there. As you found out, the part is unusable. The part is just painted wrong. Take a look at the repair manual, they only say that the lines are glued in. There is no question of a holder. There just isn't any !!! Of course you can search if you want. But it won't lead to anything. Counter: 4G0959831B Plug: 8K0973754A

For me it was the case that one line had the clips and the other line had double-sided 3M adhesive tape. There is no need for a bracket. Both lines are laid parallel to each other and glued. As in my picture, I ordered the line and installed it. Without additional brackets.

What are you looking for exactly? The part number for the sensor (encoder cable) is 3V0962239 this line is glued directly in the diffuser.

I upgraded EasyOpen from Kufatec. Everything was there and well described. Unfortunately the whole set is a bit expensive.

So far, the animation only works when I open the car. When locking, the light just goes out. The blinker is dynamic while driving and also acts as a hazard warning light. So for now a partial success.

The PWM signal is applied to the BCM, as described in the circuit diagram. With the xenon, it cannot be connected to the front lights, but only with the matrix, as there is a light module there. Hence the assumption that it will not work as it should without this module. Animation when opening works, but the blinker is no longer dynamic.

Original Skoda Zubehör. Facelift.

This is my Superb Combi L&K MJ17 with quite a few retrofits and optical details.

Hi Guys, I'm from Germany and did the FL rear light conversion in 2019. Everything works except for this light animation. When opening it is only not possible when closing. And as soon as the PWM signal is present, the indicator no longer works dynamically. Does anyone have the coding to do this? What else do I have to code in the central electrics?