Everything posted by balazs955
-
Enabling boot closing from keyfob and interior button using VCDS
Your rear buzzer which produces the beeping sound for the parking sensors is wired incorrectly or damaged.
-
Fitting New Reverse Camera Not Fitting
It should be obvious from the differences (two round edges, part number, length), that this is not the correct one.
-
Skoda Superb Virtual Cockpit
Have you tried changing the adaptations with VCDS or were you only inside the menus?
-
Amundsen MIB2 Firmware Update
Is it worth it to go from P0369T to P0480T on a 5Q0035874B unit? Will I get the colored grid menu? I just need to use the toolbox to patch swdownload, right? Are there any risks? Thanks.
-
Amundsen MIB1 maps update ?
I already read through the forums, there is no "Map" folder on MIB Solution anymore, that is why I said, that the maps are not avaiable there anymore...
-
Amundsen MIB1 maps update ?
Unfortunately the maps are not where it is said in all of these posts. Any chance that someone has it?
-
Amundsen MIB2 Firmware Update
MST2_EU_SK_ZR_P0253T MST2_EU_SK_ZR_P0369T
-
Question: >2022 Steering wheel in 2017 Superb?
Good job, looks awesome! Can I have your old one? lol
- best adapter from wired Android auto to wireless?
-
Amundsen MIB2 Firmware Update
@pab567 Hey, since I cannot PM you, may I ask for some advice/help here? First, if you could give me some information regarding car data on these two VINs (TMBAL7NP6G7029868, TMBJK7NE9F0177635) that'd be great. With the Superb, I have 3V0035871A (MIB2 Swing?), my question is, what's the easiest and cheapest way to have Android Auto, so I could use Waze while driving. Maybe unit 5Q0035840x / 5Q0035842x or 5Q0035864x / 5Q0035874x with 3V0919605A or 3V0919606 display? In the Octavia, I'd like to change the small display to a bigger one, but reading through your comments it seems that because my unit is 5E0035864A, it means that it is MIB1 Amundsen, so I cannot use a bigger screen because of the resolution difference. Is this correct? So, I'd need to change the head unit to MIB2 Bolero or MIB2 Amundsen and then buy 5E0919605N for Bolero or 5E0919606 / 5E0919605M for Amundsen? By the way, can 5E0035842 or other similar units with E be used in a Superb? Thank you in advance, Balazs
-
Infotainment retrofit (Swing -> Amundsen)
++
-
Problem with the electronic opening and closing of the tailgate
Check the coding and adaptations.
-
Light Assist Package
I asked because I remembered this post, where SashaGrace said that it can be done with a mirror.
-
Light Assist Package
@JR RS What's the cheapest option for changing between dipped and high beams (automatically, depending on the oncoming traffic)? Is it HBA? What is the minimum requirement? Can it be used with the inside mirror that has a sensor in the back?
-
Head unit like for like replacement
So, they sold you a car with a faulty glovebox unit?
-
Head unit like for like replacement
Sure, I recommend checking out the Electrical preparation section here.
-
Head unit like for like replacement
Have you connected the two necessary cables to the display? Are they new or the same you used before? What display did you change from? Part numbers would help, especially of the glovebox unit, the display looks like 3V0919605A.
-
Park assist system problems
Hey! Is it out of warranty? Have you thought about taking it into a shop? I'd try to check the cables and connections first, on both ends. Was the last picture taken while driving on the highway? Perhaps the system thinks the park assist button is being pressed or something similar.
-
Camshaft solenoids failure.
How about a picture? Please enlighten us, what wires does the solenoid valve contain other than the coil.
-
Camshaft solenoids failure.
The supplying wires aren't in the solenoid though...
-
Camshaft solenoids failure.
A coil isn't really "wiring", so ...
-
Infotainment retrofit (Swing -> Amundsen)
+
-
Enabling boot closing from keyfob and interior button using VCDS
Any chance this is doable on the Superb 3 if we code some settings from Superb to Octavia?
-
Infotainment retrofit (Swing -> Amundsen)
Hey guys! I would like to retrofit MIB2 Amundsen to my Skoda Superb (MY2015) with original MIB2 Swing unit. Included in this album are the pictures and part numbers I found for the different parts. To list them here as well, I think I need the following: Glovebox: 3V1 857 097 AL (with space for the head unit) --- Any chance I can just cut into the plastic? Display: 3V0 919 606 (8 inch with 8 buttons) or 3V0 919 605 A (6.5 inch with 8 buttons) Head unit: 5Q0 035 864 A/B/C or 5Q0 035 874 A/B/C (one of these, hopefully all of them can be used) Cables: main wire (Quadlock Wiring Harness [part number unknown]) and others (microphone [3B0035711B?], USB [5G0035222E?], etc.) GPS/roof antenna: not sure about the part number, found these: 6R0035501D, 1K0035501H, 18D035507, AAN800002AN Unlocking, coding, etc. Do these seem right? What else do I need? Are there unnecessary items in my list? Any help would be appreciated, as the quote I got was ridiculous. Sources: [1], [2], [3], [4] Kind regards, Balazs