wilsy7

Cheers! Does the metal clip just compress and push in between the plastic flap and the wheel arch to hold the top of the flap in place? Seems a lot of people have issues with this

Does the wheel need removed for fitting these or can it be done with it in place. Got some of these yday and might fit them in work today

I think a lot of people also expect the pd engine to sound like a petrol, they do make a bit of a Noise so unless its horrendous I think it's normal. Mine sounds a 100 times better than 98% of the other 1.9s that I hear driving about lol

This looks execellent with that slight drop, has ride comfort really not be reduced? Not that anyone cares! Lol

Why do you think it's better? The difference between 505.01 and 507 is the low sulphur/ash content for the dpf. Other than that they are the same. The 507 also tends to be 5w30. Personally I'd prefer the thicker 5w40. Do you know of any other differences?

I find the polish gives 90% of the same effect, I need no wipers with the polish. The water beads and runs off much like you would expect with a polish.

I can vouch for OCD, nice guys

Just use car glass polish from ag, does the same thing really only no issues

Pretty ordinary in terms of perfromance in comparison tho!

They sound ridiculous lol

**** this!! Lol

5w40, prefer the thicker stuff myself.

Thanks gobsheene! Mine does this but once 1 Minute appears on the running timer I blip the throttle and it drops back and that's it lol might check the wire just incase! Enjoy TGI Fridays if you don't die from salt poisoning lol

Where's that video of the high idle? And could you possiby post a pic identifying the alternator wire? Sounds like you've Had a productive days work

And you don't think Zane was taking protein shakes or anything else for that matter? Lol

Well for anyone who cares lol I just ordered the above I posted, mine was 3/4 inch threading, went for the 25mm.

Are they half inch thread? http://item.mobileweb.ebay.co.uk/viewitem?itemId=111052736341&index=4&nav=SEARCH&nid=62112543797

Which variation of this item would be suitable? http://item.mobileweb.ebay.co.uk/viewitem?itemId=111052736341&index=4&nav=SEARCH&nid=62112543797 I have this catch can but I assume most including the one in this thread would have the same thread sizes etc my catch can is the same as this one. http://item.mobileweb.ebay.co.uk/viewitem?itemId=350788661783&index=1&nav=SEARCH&nid=83042251249

Just make sure they aren't 4wd

Why would they get rid of those BMWs if there's plenty of life left in them?

But the Diamter of the exit on the crank case is still 19mm, so the pressure is already vented. I can see it possibly having an effect if the diameter of the pipe on the crank case was reduced. Mines been something similar to the above for quite a long time without any adverse affects?

Why would the smaller connectors add pressure to the crank case?

Anyone know of any good reliable replica websites? There's quite a few but wondering if anyone has any first hand experience of any?

Hind D I believe l

I can't stand anything non OEM in my car lol apart from me of course lol does look like a pretty cool gismo tho and a good place for it at that!