killy

New Checker http://www.skoda.co.uk/owners/emissions/pages/check-your-vehicle.aspx Mine is affected

Yes as in my siggy but just entered it again and now it does not need a recall - so they have updated the results or maybe you can only enter it once!

My CFJA march 2015 Yeti L&K is showing as needing a recall but the two skoda dealers that I have just rung have no info.

Thank You

Was that fitted? if so were did you have it fitted? Regards Mike

I thought I was wrong one but I made a mistake

The canbus would be looking for the light to go out plus the drain from the light.

This is not normal - if the battery is in good condition then you have a fault - the can bus system is constantly checking for a fault when you switch off the ignition it will check all systems for a fault and initially will draw up to 1.8 amps this should gradually drop to .02 of an amp if all is correct and this can take up to ten minuets. It is possible to check the battery drain with an amp meter but care is needed if you disconnect the battery this can lose the radio code and trigger warning lights to come on. I had the same problem on a vw caddy maxi life and the fault turned out to be an after market fitment drawing .8 of an amp - I disconnected this and the problem disappeared. The procedure is tricky but basicly it involves feeding a 12v supply to the cigar lighter socket to keep everything powered while disconnecting the battery until you have the amp meter connected between the battery and the disconnected terminal. Once the meter is connected you can trace the drain by pulling out a fuse one at a time - do not take out more than one fuse at a time - you will get them mixed up if you try it - its not a bad idea to take a photo of the fuse box just in case :yes: If you are not sure how to do it then do not try it. :think:

Yes. I am picking up my new Yeti today - it is a 170 L&K DSG demonstrator - so no adblue

Yes I have noticed that That had occured to me but wasn't sure Thank you

I have been photographing barn owls under license for the past 6 months using my Yeti as a hide. whilst sat in it last night with the radio on and the ignition switched off - the warning "switch engine on" flashed up on the maxi dot - never noticed it before. Has anyone seen this ? and what does it mean ? Regards Mike https://www.flickr.com/photos/55985722@N08/

I am afraid Graham is correct as you can see here

Its a diesel but one of the cheapest I have seen - http://www.cartime.co.uk/used-SKODA-YETI-Bury-Manchester-457483

For sale my 2012 iMac-27-MC813a 2.7Ghz Intel Quad Core i5 Processor 16GB Memory 1TB Hard drive AMD Radeon HD 6770M graphics card with 512MB RAM This will be reverted to factory settings so you can have a clean install. Apple care until 24 march 2015 - £1000 collected from North Manchester wireless keyboard and magic mouse - still got the box For sale elseware Regards mike

these any use http://www.ebay.co.uk/itm/Universal-Windscreen-Sun-Visor-Window-Anti-Dazzle-Glare-Shade-Strip-Blocker-/310681648180?pt=UK_Car_Interior_Accessories&hash=item485611bc34 or http://www.ebay.co.uk/itm/50cm-Car-Window-Roller-Sun-Blind-Adjustable-Shade-Screen-Visor-Universal-Pair-/360650358895?pt=UK_Car_Interior_Accessories&hash=item53f86fc06f regards mike

Maintenance Fitter at a Large Engineering factory

Hi They were cut on a laser before I retired

Nice one - I made some out of stainless steel when I got my first Yeti

It does BUT remember DO NOT put your keys in the boot with your shopping and then close the boot

Hi looks to be 1Z0868565F47H but please check that it will fit before you order one !!! there is a ultrasound sensor with control clipped to the back Regards Mike

Hi The Fuji 4200 is a Bridge camera not a slr and you should get some good photos with it bey try not to higher than 400 iso or you will find that you lose detil and get a fair bit of noise above this. Good luck Mike

Thanks Just had a proper look - at first I thought the hole went straight through but after sticking a screw in the holes I found that it only went in about 12 mm so I tried screwing it in and viola success a firm fit. Regards Mike

Hi I am just fitting new plates to my Yeti and the rear one is no problem it has nylon inserts to take self tappers. However the front one has been fitted with self tappers into the front valance this is never a good idea because it is to easy to strip the thread the screw cuts into the plastic. There are 4 inserts in the panel but they are not threaded and they are too large for the usual self tapper so who knows the correct fitting - I do not want to use tape or self adhesive pads. Regards Mike

What we need is someone to measure the corner weights with and without the ballast ! Regards Mike

Oh no there isn't :evil: Regards Mike