Hey guys,

I was just wondering if any of you guys knew any where i could get a 15mm allen key from as I need to get one to fit my forge rear strut brace when it comes this week (probably Tuesday).

I have looked in the usual places like halfords and local hardware stores but the biggest I can find is a 10mm :(

Any ideas?

Thx in advance

-Ben.

IIRC I did not use one, but there are some pics in my thread, lemme see if I can get you a better link shortly

Nope it is currently not working, will have a go once attachments work again sorry.

Don't know this website but came across this SIGNET 1.5mm HEX KEY SOCKET Edit: and just realised that is in fact 1.5 .15mm appears to be an odd size not sold anywhere. Sure it's not 14mm or 16mm?

Try looking for the 1/2" drive ones as you'll probably get bigger sizes in those. If really stuck see if there's any of the star key (think the word is torx?) one's that are close to 15mm, take the bolt along if you can.

Wiebo Westerhof's Photos - Fabia Estate 'vRS' project journal II | Facebook

That's where I did the fitting. Based on the comments I made, you need a number 5 & 10 allen key only, and that suggests Forge supplied the big (15 mm) one.

You will however need a spanner that is pretty frigging massive.

Ok guys thx for the tips guys I do indeed have a 5 and 10 mm one so lets hope forge supply the 15mm as you said WW VRS

Failing that ill try your star key idea Anewman

That must be a special size key. Standard metric allen keys are 12, 14, 17.

That must be a special size key. Standard metric allen keys are 12, 14, 17.

Hmm lets hope good old forge supply me with one then

15mm is missing from most hex sets. It is often supplied with kits to ensure that the supplied key is used.

If you really need to source one, Elora do a 15mm key (Part No 159-15). Any Draper stockist should be able to order one in

As stated Elora do one, also so do halfords on a 1/2 inch drive as part of their pro range.

Facom do a 15mm allen socket, it took me months to find a supplier,