would it be possible to fit two front doors from another felicia that has electric windows to my felicia which has manual and get them working?

If it is anyone got two front doors with electric windows going spare? haha

would it be possible to fit two front doors from another felicia that has electric windows to my felicia which has manual and get them working?

If it is anyone got two front doors with electric windows going spare? haha

I wondered this as well, but I've never come across a felicia with electric windows. My haynes manual speaks of e/w's, which models got e/w's?

Bohemias and L&Ks both did - I have them on my rally car (as you can't open a manual window with the X door bars of the roll cage in the way).

You'd also need the wiring for them, which comes from the centre console (where the switches are) and goes to each door; you need to take the carpet up to get that all out due to its routing (under the front seats), it's a blue-and-black pair of wires with a rectangular 2-way plug which goes all the way to the motors in the doors (and therefore is a real joy to remove/fit).

You can fit just the motor and regulator to existing doors (this is what I did with mine, as the car was built using a poverty model).

To power them, you can just have a generic electric window changeover switch and a 12v supply (again this is what I did as my rally car obviously doesn't have a centre console!)

[quote name='djaychela' date='17 June 2010 - 08:06' timestamp='1276758384' post='201657

You'd also need the wiring for them, which comes from the centre console (where the switches are) and goes to each door; you need to take the carpet up to get that all out due to its routing (under the front seats), it's a blue-and-black pair of wires with a rectangular 2-way plug which goes all the way to the motors in the doors (and therefore is a real joy to remove/fit).

You can fit just the motor and regulator to existing doors (this is what I did with mine, as the car was built using a poverty model).

To power them, you can just have a generic electric window changeover switch and a 12v supply (again this is what I did as my rally car obviously doesn't have a centre console!)

do they work well? because my windows are pretty stiff to wind. Plus where did u get the motors & regulators?

They work fine, they're a bit tardy if the engine's not running, but they save having to open the doors to wind the damn things down when handing in paperwork, and in a wet forest that really is a nightmare if you're tight on time and need to do it quickly.

Got them from a Felicia Bohemia that I broke for spares (gearbox needed more than anything), only paid £35 for it.