vRS TSI Shark Stage 1

[dunc69]

Sorry all, but couldn't find the answer with a search!

So, as per the title, how much torque with a Shark Stage 1 on a vRS TSI 2010?

Are you out there Ben?

Cheers

[vRSy]

not to sure tbh, but with the vRS TFSI at stage 1 you would expect 270-280lbft. The new vRS TSI is more receptive to a remap and makes more torque, so id say your'll get about 280-300lbft.

[dunc69]

not to sure tbh, but with the vRS TFSI at stage 1 you would expect 270-280lbft. The new vRS TSI is more receptive to a remap and makes more torque, so id say your'll get about 280-300lbft.

Thanks buddy. Sounds good. Planning ahead. Car only 7 months old, but will almost certainly head up to Shark as warranty nears its end.......

Anyone got the quoted / expected torque figure?

[Bogwoppit]

Have a read of the link below, 280lb/ft seems spot on:

http://briskoda.net/forums/topic/149680-my-experience-fl-octavia-vrs-20-tsi-sts-remap/

[shark_90]

Here's a dyno plot courtesy of nokiauk showing 281lb/ft http://briskoda.net/forums/topic/149680-my-experience-fl-octavia-vrs-20-tsi-sts-remap/page__p__1930418__fromsearch__1#entry1930418

[dunc69]

Here's a dyno plot courtesy of nokiauk showing 281lb/ft http://briskoda.net/forums/topic/149680-my-experience-fl-octavia-vrs-20-tsi-sts-remap/page__p__1930418__fromsearch__1#entry1930418

Thanks for the responses guys!

Ben, I'd be with you sooner if it wasn't for my concerns about my warranty!

Your STS might be the answer, but it's a little pricier.

With the normal Stage 1 map, would I expect warranty issues if there's a failure?

In reality though, how likely is it that the dealership will notice?

My folks are in Leicestershire, so a weekend with them and a trip to Mansfield would be all too convenient!

[Grizzle]

The torque curve on that graph is a bit iffy, around 256hp the torque dips then comes back up then heads down again