Hi all i've got a Genuine Ross-Tech HEX+CAN USB Interface up for sale, roughly 2 months old, purchased from Gendan with receipt, I'm look for £200 delivered, I can provide you my ebay username for peace of mind, any questions please ask, thanks Mark ****SOLD**** cheers

Will this come with full support too with Ross tech?

Will this come with full support too with Ross tech?

Hi, It comes with a software support certificate which says the certificate entitles the purchaser to register for tech support & software updates hope this helps

Will this come with full support too with Ross tech?

Only for the original purchaser

Only for the original purchaser

Hi, I've never registered the cable does this still apply?

The interfaces apparently register themselves through the fitted dongle.

Ross-Tech state:

"All of our

Current Interfaces act as "dongles" for VCDS, so the software should be fully functional on any PC that meets our requirements. However, we only provide support to the original owner. If you sell your interface to a third party and that person wants to be a "registered user" (eligible for product support and upgrades), he will have to register with us for $99 here. "

EDIT: Reading the letter above you now seem to have to fill a form out, when I bought mine (directly) it was done automatically.

Open VCDS and click on "About" does the Licence status say it is Fully Registered / Activated like mine below? (I have removed the serial number)

If not then the new owner should be able to register it without paying the $99.

The interfaces apparently register themselves through the fitted dongle.

Ross-Tech state:

"All of our

Current Interfaces act as "dongles" for VCDS, so the software should be fully functional on any PC that meets our requirements. However, we only provide support to the original owner. If you sell your interface to a third party and that person wants to be a "registered user" (eligible for product support and upgrades), he will have to register with us for $99 here. "

EDIT: Reading the letter above you now seem to have to fill a form out, when I bought mine (directly) it was done automatically.

I think my best bet is to try & contact Genden & Ross-Tech see if they can confirm this, thanks for your input Gizmo68

Open VCDS and click on "About" does the Licence status say it is Fully Registered / Activated like mine below? (I have removed the serial number)

If not then the new owner should be able to register it without paying the $99.

I will have a look now & report back, thanks

I will have a look now & report back, thanks

I've just check & it looks like its registered itself automatically