Skip to content

Need some help please. VCDS scan and PAS probs?

Featured Replies

Morning,

Ive just scanned my Fabia and found this? whats your thoughts?

VCDS-Lite Version: Release 1.1

Thursday, 30 August 2012, 04:39:11:55182

Chassis Type: 6Y - Skoda Fabia I

Scan: 01,02,03,08,09,15,17,19,25,37,44,46,55,56,76

-------------------------------------------------------------------------------

Address 01: Engine Labels: ***-***-***-ASZ.***

Controller: 038 906 019 NF

Component: 1,9l R4 EDC G400SG 7000

Coding: 00102

Shop #: WSC *****

VCID:

TM****6Y********0 S*Z*Z*E*9*3*9*

1 Fault Found:

19463 - Camshaft Position Sensor (G40): No Signal

P3007 - 35-10 - - - Intermittent

Readiness: N/A

-------------------------------------------------------------------------------

Address 03: ABS Brakes Labels: 6Q0-907-37x-ABS.LBL

Controller: 6Q0 907 379 AB

Component: MABS 8.0 front H03 0001

Coding: 0000008

Shop #: WSC *****

VCID: 7D8DAD7964FF

No fault code found.

-------------------------------------------------------------------------------

Address 08: Auto HVAC Labels: 6Q0-820-045.LBL

Controller: 6Y0 820 045

Component: Klimaanlage X0840

VCID: F2970E45ADA1

No fault code found.

-------------------------------------------------------------------------------

Address 09: Cent. Elect. Labels: 6Qx-937-049-B.LBL

Controller: 6Q1 937 049 D

Component: 0000 BN-SG. 1S34

Coding: 26042

Shop #: WSC *****

VCID: 3C0B607D3F65

1 Fault Found:

01117 - Generator Terminal DF Load Signal

27-00 - Implausible Signal

-------------------------------------------------------------------------------

Address 15: Airbags Labels: 6Q0-909-605-VW5.LBL

Controller: 1C0 909 601 A

Component: 11 AIRBAG VW51 0008

Coding: 12593

Shop #: WSC *****

VCID: 1E4F8AF589B9

No fault code found.

-------------------------------------------------------------------------------

Address 17: Instruments Labels: Redir Fail!

Controller: 6Y0 920 971 S

Component: KOMBI+WEGFAHRSP VDO V02

Coding: 28401

Shop #: WSC *****

VCID: 62B7FE05FD41

TM***6Y********0 S*Z*Z*E*9*3*9*

No fault code found.

-------------------------------------------------------------------------------

Address 19: CAN Gateway Labels: 6N0-909-901-19.LBL

Controller: 6N0 909 901

Component: 003D GATEWAY CAN 1S34

Coding: 00014

Shop #: WSC *****

VCID: F093044DA3AD

No fault code found.

-------------------------------------------------------------------------------

Address 25: Immobilizer Labels: None

Controller: Bit teA dre ss

Component: e 17 eingeben

VCID: 5AC7C6E5D511

No Faults Found

or DTCs not supported by controller

or a communication error ocurred

-------------------------------------------------------------------------------

Address 44: Steering Assist Labels: 6Q0-423-156.LBL

Controller: 6Q0 423 156 AB

Component: LenkhilfeTRW V270

Coding: 10120

Shop #: WSC *****

VCID: 6F9187313E93

No fault code found.

-------------------------------------------------------------------------------

Address 46: Central Conv. Labels: 6Q0-959-433.LBL

Controller: 6Q0 959 433 E

Component: 60 Komfortgerát 0002

Coding: 00019

Shop #: WSC *****

VCID: 3D0D6D79247F

No fault code found.

-------------------------------------------------------------------------------

Address 55: Xenon Range Labels: None

Controller: 6N0 907 503

Component: Leuchtweiteregelung 0005

Coding: 00010

Shop #: WSC *****

VCID: ECAB103D8F85

No fault code found.

-------------------------------------------------------------------------------

Address 56: Radio Labels: 1U0-035-156.LBL

Controller: 6Y0 035 156 E

Component: Radio YD5 0015

Coding: 00401

Shop #: WSC *****

VCID: 38037C6D0B5D

1 Fault Found:

00879 - Connection to Speaker Front Right

36-10 - Open Circuit - Intermittent

End --------------------------------------------------------------------------------------------------

What do you think?

Also I am a bit conserned as I know when you start up it takes a sec or 2 for the PAS to go light to use but twice now Ive had to wait 40+ seconds fo the the steering to kick in? untill it does it is heavier than a car without PAS?

what are your thoughts on this too?

I am only using VCDS lite.

Ignition on but not running and Ive just got home from work so car is warm and been driven 41mile.

cheers for the help

billy

  • Author

Oh and there is no eml.

For your address 09 problem, refer to this:-

http://www.briskoda....nt-elect-fault/

The alternator does not charge until above about 2000rpm with the above problem, so there may not be enough voltage in the battery for your PAS to work until you have passed that engine speed. While not ideal, try giving the car a few revs and see if the PAS light goes off.

Edited by KeithCheetham

My thoughts are that you have some dodgy speaker wiring :giggle:

Oh, and you battery may well be on it's way out.

  • Author

Cheers.

I know about radio. It is all fooooooooct up via a prev owner having ice crap! And it not being put back to std properly.

I have no lights on the dash neither. Everything goes off like it should. Ill let it develop nevway.

Cam sensor is one i am worried about most.

Not too bothered about the car as its just a runner for work but i need it to last and work so need to take some care of it lol.

Oh well

  • Author

Is the cam sensor this part?

Inpulse sender Camshaft 038 957 147G

cheers

billy

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.