Right....anyone who is after an turbo inlet pipe on their AUQ (maybe aum etc) if you are after an oversize (70)mm (3inch((ish)) pipe then please show your interest here........hopefully we can get a group buy going and obtain a tidy little discount over rrp (w8 performance??????!)

These tip's are probably one of the best oversize TIP's on the market right now so would be a nice little mod for anyone from stage1-2

Linky for a comparison

http://www.audi-sport.net/vb/a3-s3-forum-8l-chassis/195579-fao-k03s-owners-wanting-silicone-turbo-intake-pipe-tip-their-1-8t.html

Keep eyes on rob

He may be up to some magic

Depends on the price bud. Stick my name down

I am an sfs dealer and can supply at a discounted rate ;-)

Or you can buy from Rtech he has sfs one but re branded with his name and there 110 I believe

Likey Likey

Does it fit AUM engine?

Sent from my GT-I9505 using Tapatalk

What sort of discount? They are £110 or £120 (will check) delivered from R-Tech...

/edit - Clive pipped me to it

Edited 20 November, 201312 yr by Phil-W

Not sure yet! Trying to get enough people together who would like one of these then we should be able to get some money off. Would cn tuning be interested in offering a little discount for us?!

And I am assuming they would fit aum engines, but someone correct if I'm wrong?

I'm interested but as with most will depend on overall price as to whether I can commit or not.

But put me down as interested.

How much would cn tuning be able to offer them to us at, if say 10 of us were to buy?

at the right price I'd be interested (another part to go on the side to be fitted later) :think:

Edited 20 November, 201312 yr by chrisw4266

I'd be interested too :-)

im interested too, like chris said, another part to go on the side for fitting!

i would also be interested dependent on price

I would be for the right price.

As above, if the reduction in price is good, I'll be interested

Sent with Tapatalk

Well that's plenty of us interested, so now just need to find out what sort of reduction would be able to be applied. I reeealy want one of these!

Not interested, already got one, well worth it though.

 

How difficult was it to fit Andy? And ead thé improvement noticable? What jobs of spec are you at?

That should read 'and was the' !!!

Interested if they do a black one to match rest of my pipework

How difficult was it to fit Andy? And ead thé improvement noticable? What jobs of spec are you at?

Feels lot better low down with improvement right through rev range, bit of a pig to fit, hard water pipe gets in the way but if you take the bolt out holding the water pipe to the block you can squeeze it in, also make sure you use a good quality hose clip to hold it on.

Only ones I've seen so far have been blue or red...I was originally planning to go all green but it's too hard to find bits in the sane colour