...Just added a bit more blackness.....first these http://www.superskoda.com/Skoda/SUPERB-II/Superb-II-painted-headlights-sportive-bottom-eyebrows-in-BLACK-MAGIC-metallic-paint "Bottom Eyebrows"

 

 

I think the headlamp washers need plastidipping now.....

 

....And I've also just tried some of this http://www.flyeyeskit.co.uk/ on the rear lights

 

 

It's flexible plastic mesh that just sticks over the lights.  Apparently legal, and I'm sure not everyone's cup of tea....but here we are so far...

 

You need to paint the inserts of the headlamps black too, it'll be a proper Batmobile then!  

Liking the Eyebrows

 

 

 

So all the black is done now, when you doing the Gold highlights  

Liking the Eyebrows

So all the black is done now, when you doing the Gold highlights

Once it's been sold to Brimma

...Just added a bit more blackness.....first these http://www.superskoda.com/Skoda/SUPERB-II/Superb-II-painted-headlights-sportive-bottom-eyebrows-in-BLACK-MAGIC-metallic-paint "Bottom Eyebrows"

I think the headlamp washers need plastidipping now.....

....And I've also just tried some of this http://www.flyeyeskit.co.uk/ on the rear lights

It's flexible plastic mesh that just sticks over the lights. Apparently legal, and I'm sure not everyone's cup of tea....but here we are so far...

Is that an R35 GTR in the garage behind?

What is it with you lot and gold.....

 

Black Headlamp inserts - Hmmm.... here http://www.superskoda.com/Skoda/SUPERB-II/Superb-II-BLACK-Monte-Carlo-headlights but not xenons and not right hand drive...

 

Yes, well spotted - GTR behind

What is it with you lot and gold.....

 

Black Headlamp inserts - Hmmm.... here http://www.superskoda.com/Skoda/SUPERB-II/Superb-II-BLACK-Monte-Carlo-headlights but not xenons and not right hand drive...

 

Yes, well spotted - GTR behind

 

 

The Black and Gold is 

 

THIS   http://www.briskoda.net/forums/topic/218057-brimmas-jps-octavia-updated-to-040514/

AAhhhh...Thanks

 

Look - someone else thinks it's a good idea.... http://www.briskoda.net/forums/topic/319376-the-black-editions/

Great looking motor you have there.

I don't suppose you have the eBay seller for the steering wheel badge do you? I tried putting what you said into eBay but it comes up with no results so wanted to try searching for the seller instead etc....

Cheers

Dave.

Wow car looks great.

Sent from my Galaxy S5

Not normally a fan of black on black cars but I must say this is very nice. Great work!

Hi Dave

 

Seller was http://www.ebay.co.uk/usr/funplates2006

 

But it doesn't look like he's been trading recently

I have a question about your engine. I assume it is the V6 3.6 that is fitted to the R36?    Is this a VR as in the 2.8/3.2 in the MK4 or is it a true "V" ?

 

 I am thinking about the next stage for my Golf and the R36 engine might be the way forward if it is a VR 

The Passat R36 and Superb 3.6 both have the same engine using FSI

 

http://en.wikipedia.org/wiki/VR6_engine 

 

" a flagship 3.6-litre 191 kW (260 PS; 256 bhp) FSI VR6 engine (a detuned version of that fitted in the Passat R36) complete with4motion four-wheel drive and six-speed Direct-Shift Gearbox (DSG)."

 

http://en.wikipedia.org/wiki/%C5%A0koda_Superb

 

This should clear it up, I think it is a VR type?

It looks very similar, if I can find one that is not needed, should make for an interesting turbo project.     Thanks

The Passat R36 and Superb 3.6 both have the same engine using FSI

 

http://en.wikipedia.org/wiki/VR6_engine 

 

" a flagship 3.6-litre 191 kW (260 PS; 256 bhp) FSI VR6 engine (a detuned version of that fitted in the Passat R36) complete with4motion four-wheel drive and six-speed Direct-Shift Gearbox (DSG)."

 

http://en.wikipedia.org/wiki/%C5%A0koda_Superb

 

This should clear it up, I think it is a VR type?

Yup, both engines are narrow angle V6's, (15 degree Vee, compared with 60 degree Vee in most V6 engines),  effectively siamesed bores, at 15 degree angle in one block & one cylinder head, with two faces, again at 15 degrees.

 

DC.

I am sure the top of the block and bottom of the head are flat surfaces but the bores are at 15' V

 

 

I am sure the top of the block and bottom of the head are flat surfaces but the bores are at 15' V

 

head.jpg

 

Block.jpg

I sit corrected....... The combustion chambers must be wedge-shaped?

 

It's not really a Vee engine at all, probably the same firing order as a straight six, but possibly with staggered crank-pins on the crank-shaft?

 

I quite fancied a V6, but couldn't find a decent one when searching for an EOS. Gave-up in the end & bought a 2.0 Tsi instead, 250 bhp & 284 ft.lbs after a remap is

similar to the 3.2 VR6.

If I could have found a 3.6 for sale, I might have thought differently.............

 

DC 

I sit corrected....... The combustion chambers must be wedge-shaped?

 

It's not really a Vee engine at all, probably the same firing order as a straight six, but possibly with staggered crank-pins on the crank-shaft?

 

I quite fancied a V6, but couldn't find a decent one when searching for an EOS. Gave-up in the end & bought a 2.0 Tsi instead, 250 bhp & 284 ft.lbs after a remap is

similar to the 3.2 VR6.

If I could have found a 3.6 for sale, I might have thought differently.............

 

DC 

 

Yes I think it has wedge shaped chambers, quite a strange engine really, very compact though for a six cylinder. I also feel its days are numbered, modern turbo four cylinders are as powerful and more economical not to mention environmental advantages.  

James from http://remyrocdetailing.co.uk/ came and sorted out my paintwork.  I bought the car when it was 10 months, by which time it had been through a few mechanical car washes.  Really pleased with the result 

 

 

 

 

 

 

 

 

Shiiiiiiiiiiiiiiiiine!!!

Excellent results

Stunning

 

 

That is all

Looking really good mate.

I've seem James' detailing work before;

Very thorough and awesome results for sure!

Superskoda front splitter - and vRS badge (yes, I know...but it was getting a bit too black and needed at least a little colour....)

 

 

 

Looking good. Have you thought about having the headlight washers sprayed black or wrapped etc... rather than chrome?