Getting a few pm's regarding more kits so setting up another group buy for those that want it
 
I have managed to get boost nipples added if they are required along with NEW thicker gaskets, NEW better blanking plates and a slight change in pipe work for a better hold for the clamps.
 
In the kit you will receive, along with what's in the pictures, the screws. However the originals will fit and are probably slightly better in my opinion.

ASZ KIT
 

 
BLT KIT
 

 
Boost Nipple Example
 

 
Fitted
 

 
 
Group buy price is as follows:
 
Without Boost Nipples

Pd100 kits @ £36.00 including postage costs
PD105 kits @ £36.00 including postage costs
Pd130 ASZ kits @ £36.00 including postage costs
Pd130 BLT kits @ £38.00 including postage costs

Pd140 Kits @ £36.00 including postage costs
Pd160 Kits @ £36.00 including postage costs

Pd170 kits @ £38.00 including postage costs
 
With Boost Nipples
Pd100 kits @ £39.00 including postage costs

PD105 kits @ £39.00 including postage costs
Pd130 ASZ kits @ £39.00 including postage costs
Pd130 BLT kits @ £41.00 including postage costs

Pd140 Kits @ £41.00 including postage costs

Pd160 Kits @ £41.00 including postage costs

Pd170 kits @ £41.00 including postage costs

The kit consists of everything needed minus the 90 degree bend, you can either chop down your original pipe work or order a 90 degree bend that has a diameter of 52mm (2inch)
 
Instructions on fitting can be found HERE

I Will keep this GB running until we get at least 8 people. Once everyone has paid up people should start receiving their goods within 14 days.Please keep questions out of this post and enquire here this is to avoid cluttering up thread and keep confusion to a minimum.

I really want to try and make this an on-going group buy to "give back" to the forum so all being well these kits will always be available providing the source keeps making them
 

This is not an official BRISKODA organised buy and therefore BRISKODA CANNOT be held responsible for any wrong doing that may occur

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Please copy and paste everything from below the dotted line (including this text)
Please state forum name, EGR require and engine code

• Joelk2010 - PD130 - ASZ (This is an example of layout, first person please replace this with your details)
•  
•  
•  
•  
•  
•  
•  
•  
•  

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code

 

1. SKFab - PD130 - ASZ with boost nipple

Edited 29 June, 201411 yr by SKfab

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code

 

1. SKFab - PD130 - ASZ with boost nipple

2. MarkPIX - PD130 - ASZ with boost nipple

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code

1. SKFab - PD130 - ASZ with boost nipple

2. MarkPIX - PD130 - ASZ with boost nipple

3.Fabianski47vrs -PD130 - ASZ with NO boost nipple

Sent from my GT-N7105 using Tapatalk

Could you do one to fit an newer BXE manifold, I have one and have compared it to a friends PD130 manifold and it's just a little shorter

In the pic mines the one on the right

Are you sure yours isnt a AXR PD100? All the BXE engines seem to be PD105

 

Either way the answer is yes

Yup that's it lol my cars an ATD but i have a later bxe/axr manifold to go on which is basically a pd130/150 manifold to go on just been after an egr valve so will let you know soon as I decide what I'm going to do

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code

1. SKFab - PD130 - ASZ with boost nipple
2. MarkPIX - PD130 - ASZ with boost nipple
3.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

4. KesselaarD - PD130 - BLT with No boost nipple

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code

1. SKFab - PD130 - ASZ with boost nipple
2. MarkPIX - PD130 - ASZ with boost nipple
3.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

4. KesselaarD - PD130 - BLT with No boost nipple

5.notts-vrs - PD130 - ASZ with NO boost nipple

1. MarkPIX - PD130 - ASZ with boost nipple

2.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

3. KesselaarD - PD130 - BLT with No boost nipple

4.notts-vrs - PD130 - ASZ with NO boost nipple

 

1. SKFab - PD130 - ASZ with boost nipple
2. MarkPIX - PD130 - ASZ with boost nipple
3.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

4. KesselaarD - PD130 - BLT with No boost nipple

5.notts-vrs - PD130 - ASZ with NO boost nipple

6.Redlinemike - pd130- asz- no nipple 

1. SKFab - PD130 - ASZ with boost nipple
2. MarkPIX - PD130 - ASZ with boost nipple
3.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

4. KesselaarD - PD130 - BLT with No boost nipple

5.notts-vrs - PD130 - ASZ with NO boost nipple

6.Redlinemike - pd130- asz- no nipple

7. Barbourc1 - PD130 - ASZ - No boost nipple

1. SKFab - PD130 - ASZ with boost nipple

2. MarkPIX - PD130 - ASZ with boost nipple

3.Fabianski47vrs -PD130 - ASZ with NO boost nipple [/font][/color]

4. KesselaarD - PD130 - BLT with No boost nipple

5.notts-vrs - PD130 - ASZ with NO boost nipple

6.Redlinemike - pd130- asz- no nipple

7. Barbourc1 - PD130 - ASZ - No boost nipple

8.AaronD95 - PD130 - ASZ - with boost nipple

Getting Pms with people getting a little impatient. We need at least 1 more person but ideally 10 as usually have 1 or 2 people drop out.

I can supply a number of EGRs now for most diesel engines. so if you have friends NOT on here let them know and get them involved.

 

I can supply single units for a few £ more but so if in a hurry them PM me and we can sort something out.

 

1. MarkPIX - PD130 - ASZ with boost nipple
2. Fabianski47vrs -PD130 - ASZ with NO boost nipple [/font][/color]
3. KesselaarD - PD130 - BLT with No boost nipple
4.notts-vrs - PD130 - ASZ with NO boost nipple
5.Redlinemike - pd130- asz- no nipple
6. Barbourc1 - PD130 - ASZ - No boost nipple
7.AaronD95 - PD130 - ASZ - with boost nipple

 

1. SKFab - PD130 - ASZ with boost nipple

2. MarkPIX - PD130 - ASZ with boost nipple

3.Fabianski47vrs -PD130 - ASZ with NO boost nipple 

4. KesselaarD - PD130 - BLT with No boost nipple

5.notts-vrs - PD130 - ASZ with NO boost nipple

6.Redlinemike - pd130- asz- no nipple 

 

Sorry Guys, im out for now cos no car to fit it to 

Getting Pms with people getting a little impatient. We need at least 1 more person but ideally 10 as usually have 1 or 2 people drop out.

I can supply a number of EGRs now for most diesel engines. so if you have friends NOT on here let them know and get them involved.

I can supply single units for a few £ more but so if in a hurry them PM me and we can sort something out.

Im up.for one for a pd 130 blt no nipple

Any ideas wen these wud be ready for delivery?

1. MarkPIX - PD130 - ASZ with boost nipple

2. Fabianski47vrs -PD130 - ASZ with NO boost nipple [/font][/color]

3. KesselaarD - PD130 - BLT with No boost nipple

4.notts-vrs - PD130 - ASZ with NO boost nipple

5.Redlinemike - pd130- asz- no nipple

6. Barbourc1 - PD130 - ASZ - No boost nipple

7.AaronD95 - PD130 - ASZ - with boost nipple

I'm not sure where this is up to but if it's still running then I'll get one for mine, I want one for a PD130 - ASZ (no boost nipple)

Will contact everyone later in the week to confirm number and go from there

I need one of these too blt no nipple pd130 if it's not too late

PM sent to those interested.

You can still join in with the GB at present time

 

1. MarkPIX - PD130 - ASZ with boost nipple - CONFIRMED
2. Fabianski47vrs -PD130 - ASZ with NO boost nipple- CONFIRMED
3. KesselaarD - PD130 - BLT with No boost nipple
4. Barbourc1 - PD130 - ASZ - No boost nipple - CONFIRMED
5. AaronD95 - PD130 - ASZ - with boost nipple - CONFIRMED

6. R1CH360 - PD130 - BLT - No boost nipple - CONFIRMED

7. TommyH - CONFIRMED

8. CHENEY - PD130 - BLT - CONFIRMED

9. topcat2006 - PD130 - ASZ - no boost nipple - CONFIRMED

I'm still interested in this

PD130 ASZ with no boost nipple for me please.

The still open

This offer still open