For sale

 

All items to fit a FL Octavia.

 

4 x Front parking sensors (unpainted) £8 each posted. SOLD

 

1 x OPS module 6J0 919 475 A (Rear OPS module) £12 posted. SOLD

 

1 x Front parking sensor loom £5 posted.SOLD

 

7 x Wheel centre caps (All exhibit signs of water ingress). Will need a refurb before fitting. £10 for the lot posted.

 

All offers considered.

Are these genuine skoda parts or aftermarket? Will they fit pre FL?

Very very interested in the front system.

Any photos?

Sent from my Galaxy S5

The OPS module only does the rear.

 

When I fitted my front parking sensors they were already fitted and wired up in the bumper (previous owners mistake).

 

The sensors are from the link below.

 

http://www.cars-equipment.com/www/en/shop/park-pilotpla-park-assistentops-sets-parts/oem-front-ops-for-skoda-octavia/

I can supply looms to complete retrofit of ops

Someone must want a cheap rear ops system.

Would the controller work on a pre FL Octavia?

Sent from my D5803 using Tapatalk

Eddie will these sensors work a on Pre FL Octavia?

Sent from my Galaxy S5

Yes, but you must have a newish gateway

 

L or above

Sorry for daft Q, I have rear parking sensor, just bleeps, looks like dealer fitted, if I fit this Ops mudule, what else is needed for it to show on the Bolero (12 plate FL vRS).

cheers

Sorry I am not sure. Eddie-NL may be able to help.

Yes, but you must have a newish gateway

L or above

How do I tell?

Sent from my Galaxy S5

How do I tell?

Sent from my Galaxy S5

VCDS scan or physically look at it.

Sent from my D5803 using Tapatalk

VCDS scan or physically look at it.

Sent from my D5803 using Tapatalk

Where is it located?

Sent from my Galaxy S5

Where is it located?

Sent from my Galaxy S5

Can't remember, sorry

Sent from my D5803 using Tapatalk

The can gateway is above the pedals on the FL, but it is not very easy to see.  On the pre fl I think it is on the passenger side. A VCDS scan is probably the easiest way of finding out.

Depends when it's made - the gateway on my pre-fl is on the right hand side above the pedals (or in reality, below the scuttle panel and wiper motor).

Depends when it's made - the gateway on my pre-fl is on the right hand side above the pedals (or in reality, below the scuttle panel and wiper motor).

It's an MY08. Built I think November / December 07

Sent from my Galaxy S5

You should just be ok. It is under a cover below the wiper mechanism as John mentions on a car of your age.

It's an MY08. Built I think November / December 07

Sent from my Galaxy S5

should have a newish one

should have a newish one

 

Mines too old.

Eddie, can you help on my quey above at all, post #9. Thanks.

Eddie, can you help on my quey above at all, post #9. Thanks.

First off, if your current sensors are factory then you have a fault in the system.

 

If the dealer retrofitted some aftermarket ones, then that needs to be removed

 

Buy the above sensors and module

and i can sort out the looms you need to retrofit them

I think they are dealer fitted Skoda ones, they look same as other ones I've seen on Octy's.

you would require 4x holders for the vrs too

will take the rear OPS module assuming its still available.