Jump to content

Lovely day for Detailing an Audi S3


ChrisRs

Recommended Posts

Many thanks to Chris & Alan, it is looking great. 

 

Since getting the S3 I have only clayed and sealed it before, this is the first time any correction has been done. The car had quite bad cobweb scratches from a year of improper washing technique by the previous owner. There were also a fair few stone chips on the bonnet. I had filled these and sanded them back flat before bringing it up to Chris. post-103429-0-01079700-1429802861_thumb.jpg 

 

So the steps it went through are as follows:

  • Soaked with a snow foam and TFR mix to remove most of the dirt and help remove the remains of the previous sealant
  • TBM with added Autobright wax off 
  • The wheels were soaked in fall out remover to clean off the brake dust, these didn't need much attention as I have already cleaned and sealed them with Gtechniq C5 
  • Dried car
  • Polished out the sanding marks with a Rupes rotary, 3" medium pad and Sonax EX 04-06
  • Polished the whole car with the Flex 3401 VRG, 5" medium pad and Sonax EX 04-06
  • Wiped down with IPA/paint cleaner mix
  • Sealed with Sonax Nano Paint Protect
  • Sonax BSD top-up on the wheels

 

Working on the sanded spots

post-103429-0-90459100-1429803995_thumb.jpg

 

Alan and Chris hard at work

post-103429-0-83924800-1429803993_thumb.jpg

 

Some reflection porn

post-103429-0-46598100-1429803741_thumb.jpgpost-103429-0-46675900-1429803738_thumb.jpg

 

I'm sure Chris can correct any points I got incorrect.

  • Like 4
Link to comment
Share on other sites

Pretty much what we did Andy

Thanks for adding

I cant stress enough, how skilful you were at filling those chips..Top job...The polishing of the wet sanding was the easy bit

Let us know how the Sonax Nano Sealer performs please..It was doddle to apply wasnt it?

As for the shorts......just the weather for it Simeon...at least we didnt get our Detailing shirts off!!!

  • Like 2
Link to comment
Share on other sites

I really do need to get booked in with you some time Chris... once the car is back from the body shop.

 

I've always had a lot of light surface/swirl marks that need sorting.

 

Phil

Link to comment
Share on other sites

Please note: Due to building work from 1st May..and continuing for 3 weeks, it will not be possible to offer this service, but I can travel within a reasonable distance during this time

Please contact me via PM to discuss your requirements
This does not affect booking already made throughout April
Thanks
Chris
(ChrisRs Detailing, Bingley)

 

 

Having an Extention built Chris

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.