I have been reading about coding options and saw that on the Octavia III both rear LED fog lights can be activated. Doe anyone know whether this can be done on a Superb with a VCP lead?

On a FL Superb 2?

 

Yes, it can with VCP, but not with VCDS. There are a few of us with VCP, whereabouts are you?

Edited 15 December, 201510 yr by andyvee

Do you know the coding bytes and bits or do you know of a site that I have missed where they describe it?

It isn't coding - you have to read a portion of the memory and change it, VCP has a function for doing it

didnt know this!

 

Would this be the same on the Yeti then... which also has 2 fog lights but only 1 works?

I think it depends on spec level for the yeti. If there is already a bulb and wiring in place then it almost certainly can be activated.

didnt know this!

 

Would this be the same on the Yeti then... which also has 2 fog lights but only 1 works?

Which Yeti? Mk1, FL or Mk2?

Which Yeti? Mk1, FL or Mk2?

Well our 2015 Yeti FL seems to have 2 actual bulbs, but only one fog actually works.

Pretty odd really i thought lol

I think it depends on spec level for the yeti. If there is already a bulb and wiring in place then it almost certainly can be activated.

Ah okay. Cheers!

Ours has a bulb, but not sure about wiring haha.

Its the basic S 2015 FL 1.2 TSI.

Sorry for taking over this thread abit OP..

Yes, VCP can enable the second fog on a FL Yeti.

Yes, VCP can enable the second fog on a FL Yeti.

 

Top man. 

 

If it was do'able on VCDS id do it now.. but that VCP seems like maybe abit too much hassle  

 

Thanks though. Very good to know  

Top man. 

 

If it was do'able on VCDS id do it now.. but that VCP seems like maybe abit too much hassle

 

Thanks though. Very good to know

Where are you in the UK - there are a few of us with VCP, I'm in East Lancs, Mike Holroyd is in Whitby, Eddie-NL is in Norfolk I think plus there are probably a couple more as well

Edited 21 December, 201510 yr by andyvee

Where are you in the UK - there are a few of us with VCP, I'm in East Lancs, Mike Holroyd is in Whitby, Eddie-NL is in Norfolk I think plus there are probably a couple more as well

Its alright mate, not to worry. If it has anything else done and is plugged in ill get em to do it, but otherwise its not a big deal.

Cheers for the info though.

I think it depends on spec level for the yeti. If there is already a bulb and wiring in place then it almost certainly can be activated.

 

Several people have tried, but no-one has managed to do it.

Spec level doesn't matter.

Several people have tried, but no-one has managed to do it.

Spec level doesn't matter.

I know of one that has been done.

Sent from my HTC One_M8 using Tapatalk

Several people have tried, but no-one has managed to do it.

Spec level doesn't matter.

All the wiring diagrams I seen for the yeti agree with you, there should only be a single rear fog connected. Always on pin B50 of the BCM if I remember correctly which is why footwell lighting retrofits can be an issue.

Yet a couple of folk claim to have done it on the yeti so at least some MY or spec must have the second fog wired up. I believe that if the bulb and wiring is there then it is possible to activate both rear fogs with VCP/odis-e.

I've only seen one, and it was pretty much the same setup as a FL O2 with the BCM and Byte 18 and both rear fogs wired up. VCP enabled the second rear fog.