Vrs better brakes....!?

[mac26]

Just wondering what brake upgrades people have done? Seen as standard aren't too great!

I know some people use brackets and the Porsche calipers, but has anyone done any other things?

Also has anyone's touched the rears?

Cheers!

[joedemp]

Octavia mk1 or TT mk1

312mm up front and

256mm on rear

Got mine from eBay

Edited 12 February, 2016 by joedemp

[joedemp]

Front

https://www.dropbox.com/s/n3jj45yydapmbe7/2016-01-20%2015.21.14.jpg?dl=0

Rear

https://www.dropbox.com/s/j6281voe6m2gprx/2016-01-20%2015.21.35.jpg?dl=0

Edited 12 February, 2016 by joedemp

[mac26]

Thanks!

No need for spacer blocks I take it?

[joedemp]

Nope only needed to top up brake fluid and refit wheels, mine was a 1.6tdi a little bit more work was needed than doing it to a vrs

I had to fit vrs front hubs so fitted coilovers while I was at it

https://www.dropbox.com/s/1sidc1ej47qy740/2016-01-22%2010.21.26.jpg?dl=0

Edited 12 February, 2016 by joedemp

[mac26]

Cheers

[KarlvRS1991]

VW Golf R32 brakes have been done before too.

Sent from my SM-G925F using Tapatalk

[sharkrider]

I simply used standard discs, yellowstuff pads, and ate blue racing fluid, works quite well for a cheap option

[tempra007]

I have a 312mm set up, soon to be replaced by a 330mm set up (the 330 is serious overkill, but, what can you do)

[sharkrider]

I have a 312mm set up, soon to be replaced by a 330mm set up (the 330 is serious overkill, but, what can you do)

how much power does your monte have ?!

[Ant-Vrs]

Mk4 golf r32 brakes on mine.

Twin pot with 334mm two piece disc

[MillsyVRS]

Are any of the bigger discs a straight swap? So no need to replace or modify anything to get them on?

Would aftermarket centre discs be better than standard ones of the next size up?

[Ant-Vrs]

Are any of the bigger discs a straight swap? So no need to replace or modify anything to get them on?

Would aftermarket centre discs be better than standard ones of the next size up?

the r32 ones are a straight swap and no need for spacers too but need 17s minimum

[fabianoh5n1]

straight swap 

[MillsyVRS]

straight swap

Nice. Are they Tarox discs? Same size as the standard ones? Would you have a link at all?

[MillsyVRS]

the r32 ones are a straight swap and no need for spacers too but need 17s minimum

Thanks, I've got the gigaros on so should be ok. I'll have a look on eBay and see what I can find.

[fabianoh5n1]

Nice. Are they Tarox discs? Same size as the standard ones? Would you have a link at all?

 

323 mm setup . lemme see if i can find a link 

 

there you go http://www.tarox.co.uk/product/tarox-brake-kit-volkswagen-polo-6r-all-models-with-288mm-discs-sports-compact-kmvw0986/

 

other colors then black will cost you 200 extra 

 

will fit with standarts with spacers 

 

Edited 13 February, 2016 by fabianoh5n1

[tempra007]

how much power does your monte have ?!

Just standard, if I started to modify the engine the wife definitely would divorce me

[mac26]

Hmmmmm, decisions decisions now....!?

Time to trawl eBay for r32 bits me thinks!

Thanks again everyone!

[Tech1e]

Thanks, I've got the gigaros on so should be ok. I'll have a look on eBay and see what I can find.

Make sure to get MK4 R32 brakes.

[MillsyVRS]

Hmmmmm, decisions decisions now....!?

Time to trawl eBay for r32 bits me thinks!

Thanks again everyone!

Sorry for hijacking your thread mate!

[mac26]

Sorry for hijacking your thread mate!

No worries mate! Looks like we've been after the same info anyway.

Just let me know when you've found someone doing buy one get one free on r32 calipers

[Yiannis]

Hi,

 

Just wondering as i am looking at just putting upgraded discs and pads into original calipers until i invest in other performance upgrades. what are the original calipers in the VRS 1.4 TSI, TRW, Girling, ATE?? Thanks 

[SuperTurbo]

ATE on the VRS. I wouldn't bother with "upgraded" standard size discs. Just lots of money for minimal heat dissipation advantage from drilled/grooved pattern.

Money better spent on better pads, either EBC Yellow Stuff or Ferodo DS Range

[mac26]

Well it's a while ago but I've finally done it...

Got mk4 r32 front brakes to put on the car!

I just need to get a 17" wheel for my spare!!