Dashcam wiring - Nextbase kit

[Simon300]

On 20/12/2019 at 09:22, Confused_Cheese said:

 I'd imagine you were either fitting the fuse tap the wrong way around or of the fuses is faulty/blown? Might need vcds/carista/odbeleven to reset the air bag warning light as you'll of tripped a code.

 

I'd recommend finding an empty fuse slot for the dash cam if there is one, I'm using slot 34 on mine which is "Heated windscreen washer jets" which my car doesn't have. No piggy back fusing, just straight in. No chance of tripping anything else.

I just installed my dashcam (Apeman) with a Nextbase kit. I used fuse slot 35 which the owner's manual says is "Not assigned" but is switched with the ignition key.

 

Note I think the way up the carrrier is installed matters - I have the wire pointing upwards (like the video shows too). Also the blue light on the Nextbase transformer box didn't come on until I started the engine (but my battery voltage was 11.4V so maybe that's the problem).

[rocky2808]

On 29/05/2016 at 19:46, Eeeekkk said:

All done, thank you   Not nearly as professional looking as the photos above, but it works!

 

Top of screen, left a little slack in case I move it slightly.

 

 

Fuse box, I couldn't see any holes except where the cover hooks in, so we undid it quite a long way to push the cable through.... hope that looks ok.

 

 

[rocky2808]

Hi just checked Fabia Mk 3 Handbook and it says that fuse  29 is for airbags  anyone else checked it please