Tv tuner is power and MOST only.  In 5F  there is an adaptation in Car_Function_List_BAP_Gen2  > TV_tuner_0x2C_msg_bus , Comfort data bus is selected i don´t know if it is the correct one and have lots to choose.

5 hours ago, Camarao69 said:

Tv tuner is power and MOST only.  In 5F  there is an adaptation in Car_Function_List_BAP_Gen2  > TV_tuner_0x2C_msg_bus , Comfort data bus is selected i don´t know if it is the correct one and have lots to choose.

There’s a single LIN wire to the 5F, has this been added?

 

you’re right about no canbus

Hello, yes the ring break diagnostics cable was plugged to the 5F. Here is the scan with odis.

 

Edited 27 December, 20223 yr by Camarao69

So much back and forward all this time and every thing was working  , you don't have to enable 57 tv tuner in gateway because it talks to the mib2 unit 5F (5F is a Most bus master ) and obdeleven did not help in here because it does not scan most bus modules . A year after and i have it working finally.

Edited 27 December, 20223 yr by Camarao69

10 hours ago, Camarao69 said:

So much back and forward all this time and every thing was working  , you don't have to enable 57 tv tuner in gateway because it talks to the mib2 unit 5F (5F is a Most bus master ) and obdeleven did not help in here because it does not scan most bus modules . A year after and i have it working finally.

Thank you for sharing! I'm keen to enable this for my Superb! 

 

Roy - Singapore

Hello , i as able to see tv in the back monitors but if i want to pass multimedia from the mib unit i can´t , how ca in achieve this ?

5 hours ago, Camarao69 said:

Hello , i as able to see tv in the back monitors but if i want to pass multimedia from the mib unit i can´t , how ca in achieve this ?

What are you using for the rear monitors as i assume they are aftermarket? Didnt think the superb came with them as standard?

On 06/01/2023 at 18:34, ApertureS said:

What are you using for the rear monitors as i assume they are aftermarket? Didnt think the superb came with them as standard?

Yes they are aftermarket , but the tv tuner just conects to te monitors through rca cables yelow red and white . I always thought that they would mirror the mib unit but now i'm starting to think that it works just like this . The tv tuner it self does not have many configurations to switch via odis.

On 27/12/2022 at 15:53, Camarao69 said:

So much back and forward all this time and every thing was working  , you don't have to enable 57 tv tuner in gateway because it talks to the mib2 unit 5F (5F is a Most bus master ) and obdeleven did not help in here because it does not scan most bus modules . A year after and i have it working finally.

/cdn-cgi/mirage/250e36b55f1bb7d3351388ef5c6893f6613c4f5336e7f158a718e2e3d2398eea/1280/https://www.briskoda.net/forums/uploads/monthly_2022_12/20221227_154437.thumb.jpg.1e017c1b7f5df0fb362a612e5c0b21e2.jpg

I have been contacting obd 11 because of  most bus modules not showig  , they have now updated the aplication and it is working.

Does anyone know if the dvb tv tuner was carried over to the larger columbus 9.2" screen that is fitted in the facelift superb models 2019 and above? 

On 13/06/2023 at 07:05, aSuperb3v3 said:

Does anyone know if the dvb tv tuner was carried over to the larger columbus 9.2" screen that is fitted in the facelift superb models 2019 and above? 

It was never fitted as standard. But yes it works with it no problem. (MIB2.5, NOT MIB3)