Hi guys did this to my 2020 Karoq with the latest generation of the VCDS cable. First screen shot initial 2nd completed coding with 30 colours..... any one else attempted this...

 

 

 

 

Hello there

 

It is not the Amundsen navigation right? 

no this just allows you change colours on radio and virtual cockpit

No. I mean your navigation system, your little computer.  

 

Awesome, I miss my ambient lighting 

It's very beautiful 

What's the steps on vcds to do it 

Pls

Can you please share it with the coding? 
thanks !

For those who think that the ambient light intensity is not good enough, you can modify the intesity value using vcds.

The default value is 37% but you can increase it up to 100%. You can still modify the intensity from your multimedia system.

In the attached image, the door panel has the ambient light set to 99% and the dashboard, is stock at 37%( I am talking of the values from vcds, from the multimedia system, they are both set to 100%).

You can do this from 09 control module, using 31347 security access code and go to adaptation.

There, you will need to modify the value for 4 channels, one for every zone: ENG128535, ENG128536,ENG128537, ENG128538.

Best of luck! 🥂

 

As for the 30 colors palette, you can find the script and values here:

https://www.briskoda.net/forums/topic/368574-vcds-options-on-superb-iii/?do=findComment&comment=5543396

I have made the modifications manually, which took me like an hour but it worth it 😎

Colors 12 and 16 are made by me 🫣😅

Edited 29 April, 20242 yr by Viorel_92

On 29/04/2024 at 20:00, Viorel_92 said:

For those who think that the ambient light intensity is not good enough, you can modify the intesity value using vcds.

The default value is 37% but you can increase it up to 100%. You can still modify the intensity from your multimedia system.

In the attached image, the door panel has the ambient light set to 99% and the dashboard, is stock at 37%( I am talking of the values from vcds, from the multimedia system, they are both set to 100%).

You can do this from 09 control module, using 31347 security access code and go to adaptation.

There, you will need to modify the value for 4 channels, one for every zone: ENG128535, ENG128536,ENG128537, ENG128538.

Best of luck! 🥂

 

Man i've been looking for this information absolutely everywhere! Can you confirm what address affects what sets of lights, roughly? There's 5 strips (well, technically 6) but 4 addresses in there

Hi there,

They are divided in 4 zones, one for each door, one for the light above the glove box and one for the area from the steering wheel(2 + 1 +1). I don't know exactly what goes where in term of chanel but you easly find out by modifying one o them and see the result. Also, you cand set it to 127 which is the hight possible value but the dimming from the multimedia system won't work anymore and the lights will stay lit to 100%. Hope this helps.

On 12/09/2020 at 15:17, peekay34 said:

no this just allows you change colours on radio and virtual cockpit

Helo, can you help me sir, when i go into VCDS and into -09 central electronics. - 10 - adaptation is greyed out, i entered the security access code: 31347

On 29/04/2024 at 21:00, Viorel_92 said:

For those who think that the ambient light intensity is not good enough, you can modify the intesity value using vcds.

The default value is 37% but you can increase it up to 100%. You can still modify the intensity from your multimedia system.

In the attached image, the door panel has the ambient light set to 99% and the dashboard, is stock at 37%( I am talking of the values from vcds, from the multimedia system, they are both set to 100%).

You can do this from 09 control module, using 31347 security access code and go to adaptation.

There, you will need to modify the value for 4 channels, one for every zone: ENG128535, ENG128536,ENG128537, ENG128538.

Best of luck! 🥂

 

In VCDS and into -09 central electronics. - 10 - adaptation is greyed out, i entered the security access code: 31347

Honza179, you need to make sure that your tester(vcds) is installed correctly and that it supports cars after 2016

3 hours ago, Viorel_92 said:

Honza179, you need to make sure that your tester(vcds) is installed correctly and that it supports cars after 2016

How do i do that sir?