Hello All,

 

I recently replaced a fuse in my fuse box, for the headlamp washers as it was blown.

Whilst there now functional, they still don't pop out. 

 

At the moment I did this, my window screen wash stopped working... I was about to give up so I put the panel back and voila it started working again. (I checked all fuses for a blow, they all are okay)

 

I took a picture of my fuse box, in the hopes someone can help me make sure all the correct fuses are in the right place as diagrams only cause my head to hurt, they seem to be different depending on the market.

 

Are there any fuses missing, or perhaps not assigned at all? Also are all the correct amps in the right place? (Right hand drive, UK Car)

 

Thanks

Daz 

I have looked at my fusebox and I have alot more fuses then you, but I have a 2006 tfsi so that could be the reason.

The fuse you are looking for is number 36, which I believe you have one in.

Also the headlights need to be turned on to activate the headlight washers. I have taken my fuse out as the cover kept on popping off and it is a right pain to fix.

I have got fuses in numbers 40, 41, 42 which according to my diagram are for the fan, and windscreen wipers and washers?  I think

 

 

 

 

Edited 10 August, 20214 yr by Dpearce

Can I just add a querie on this one? Where the x2 25amp fuses are, one of mine is missing (rear screen heater), bought a new fuse & it seems the terminals which the fuse locks into, has disappeared!!! The fuse just wobbles about loose! Any ideas on how to get my connector back please? Thanks...