Can anyone tell me what is the name of my infotainment ? MIB 1 ? does it connect with an aftermarket rear view camera?

Bolero MIB1

Thank you so very much. Do you know if this unit can be connected with rear view camera? Thank you very much for your time

I am pretty sure I have seen people connect rear view camera to MIB1 units.

 

Here you go:

 

 

Thank you very much for your help. I really appreciate it. 

On 16/01/2022 at 19:24, Vahids said:

I am pretty sure I have seen people connect rear view camera to MIB1 units.

 

 

Only if you have the "VOICE" button on the bottom left of the screen, if it is a "TP" button (like on mine) then a camera won't work. 

Are you 100% sure about that?  I got the TP button. I know you want to help but the news are very disheartening...have you checked with others? 

Can't say i'm 100% on it it's just what I've read on here from others. I went as far as buying the camera and running the cable from front to back in the car then I read that it won't work unless you have the VOICE button so didn't go any further.

 

All the pictures i've seen of working cameras in this forum all have the VOICE button.

I'll try and find out where I read it and why it won't work, but I suspect it was from Sasha who's a bit of an expert on these things :).   

 

 

Edit: found the thread

 

Edited 21 January, 20224 yr by lway

It would be wonderful if you could keep searching. I Ve been trying to set up the damn thing for over a year now. I mean on and off my work schedules . It is very weird cause when I put it in reverse I get adjustments on the screen for brighteness etc. And a warning down low to watch out as I am reversing. This means to me that the unit is trying to do something. I did the vcds coding at my mechanics . It seems that it wants to show image but for some reason it won't get signal through the RCA of the camera. I have put a small 4.3 inch monitor left to my steering wheel cause I really want to put the camera in use and I get excellent image. But I have to push an on off switch every time I want to see just to give power to the monitor. The camera has constant current and it doesn't drain at all. The whole thing has been driving me crazy for so long . So if you can keep your research I would appreciate it. On my end if I find out anything new I will keep you posted. And something I remembered about Sasha. She said that it when we do the vcds coding we are supposed to check the LOW CAMERA on the vcds screen. Which my mechanic never did. It's hard for me to find the time after work and schedule a meeting with my mechanic on a day that he is not too busy to test these things ...you understand. Anyway for me it's an ongoing project. So please help to solve this mystery. Thank you very much for taking the time to read all this. Hope to hear from you soon.