Good evening.

I have new plates for the Superb, the old ones are secured with self tappers.

 

I am thinking of sticking them on instead, for neatness, anyone else used tape, velcro or those Halfords red strips?

The front plate is slightly curved of course.

 

Any advice welcome.

 

Thanks.

I hate fixing screws, as a result all my cars have their numberplates attached by double sided tape.

I use an 3M product and by it by the roll it's great as it sticks really well the problem occurs when you want to put the car back on its original registration number and have to remove the sticky stuff!!

The front is slightly curved, all I do there is make sure the numberplate is at room temperature and the sticky tape as well, fix it on and then using some strong gaffer tape just secure the edges of the numberplate for 24 hours.

Thanks for that mate

I have some heavy duty velcro and also found some of that tape in my box of odds and ends.

 

I am replacing the original plates as they have the original dealer on them plus the GB logo. Too much clutter for me! 

Morning.

 

I followed your advice Jayw13702.

The tape worked very well, I cleaned the plate areas with white spirit etc. I used masking tape to line up the rear one.

The rear especially looks so much neater without those naff screw caps.

 

Thanks again.