Hello,

 

I'll be changing a front wheel bearing on my 2015 Scout this weekend.

 

Just wondering if anyone has the above?

If anyone knows the bearing bolt torques too then even better.

 

Thanks in advance

 

Andy

Whats your VIN and ill send you the full details as it varies by bolt type (there are 3 bolt types)

TMBMJ7NE7F0188519

 

That's brilliant, thanks so much

For the front hub bolt it is as follows:

 

Torque

Screw	Torque
Screw -WHT.005.437-/black	200 Nm and turn 180°
Screw -WHT.005.437.A-/silver	200 Nm and tighten by 90°

 

 

 

For the wheel bearing:

1 hour ago, ApertureS said:

For the front hub bolt it is as follows:

 

Torque

Screw	Torque
Screw -WHT.005.437-/black	200 Nm and turn 180°
Screw -WHT.005.437.A-/silver	200 Nm and tighten by 90°

 

 

 

For the wheel bearing:

 

Thanks so much for this

2 hours ago, ApertureS said:

For the front hub bolt it is as follows:

 

Torque

Screw	Torque
Screw -WHT.005.437-/black	200 Nm and turn 180°
Screw -WHT.005.437.A-/silver	200 Nm and tighten by 90°

 

 

 

For the wheel bearing:

Any thoughts on doing the 180 degrees with an impact gun? I know people go through the wheel centre with the wheel on the ground but surely weighting the bearing before the bolt is tight can damage the new bearing?

1 hour ago, AJK87 said:

Any thoughts on doing the 180 degrees with an impact gun? I know people go through the wheel centre with the wheel on the ground but surely weighting the bearing before the bolt is tight can damage the new bearing?

Both can work, Depending on access. For the 180 degrees I would personally do this:

 

Tighten first to 200Nm, mark bolt and a reference point with paint pen, tighten the angle as much as i can in the air, fit wheel without centre cap and lower to floor, finish the remainder till both paint marks are furthest from eachother, ie. 180 degrees apart.

When i dont have great access for a bar then ill use an impact gun to do the angle yes  

Thanks for the help, got it changed with no issues. My noise is still there though 😫