Just now, Vincent_83 said:

I haven't retrofited yet this function on my Kamiq, but just searching a lot of information.

For my side, I have a separate gateway module because I have the High BCM

Bummer

If you decide to install it, i have the auto scan and the adaptation of a bcm (high?) and the software for the swap function, maybe you can get it done on your car. The bcm on that car is 2q0937090D

5 minutes ago, SUBZER0 said:

Bummer

If you decide to install it, i have the auto scan and the adaptation of a bcm (high?) and the software for the swap function, maybe you can get it done on your car. The bcm on that car is 2q0937090D

Mine is 2Q0937090E (D version is also "Standard Plus" version (High) (AW4)

Edited 17 October, 202517 Oct by Vincent_83

https://mega.nz/#P!AgBDv0fNLhDxADcVZB4_YlmHhQZ4FzDlKVVLJZ4J64bj0iKdPPC3lwi1Bjj76OsGsBB_5rsKwWSm7tEOWP4nUOVGRQcEQVyPZnAaxR5aUACdAbSObK06Jg

1 hour ago, Cairus said:

You know that the Scala and Kamiq without ECU 16 also have ACC? However, you have a BCM that has the gateway integrated, probably mid-version.

I think this is the Problem

From what I understood from the wiring diagrams, the BCM connects certain components (particularly the switchgear) in the absence of adaptive cruise control.

I didn't know it was possible to have ACC without the J527 ECU.

1 minute ago, Cairus said:

https://mega.nz/#P!AgBDv0fNLhDxADcVZB4_YlmHhQZ4FzDlKVVLJZ4J64bj0iKdPPC3lwi1Bjj76OsGsBB_5rsKwWSm7tEOWP4nUOVGRQcEQVyPZnAaxR5aUACdAbSObK06Jg

What is this ? There is a protection password on this megafile

I know, my Password...

SwaP ACC solution

1 minute ago, Cairus said:

I know, my Password...

SwaP ACC solution

Ahh, that's very interesting.

Can you please tell me your password to decrypt these files ?

You have the Controller R242?

Just now, Cairus said:

You have the Controller R242?

Yep, I have Front Assist, Lane Assist and TSR from factory.

And I have retrofited Side Assist and Park Assist and I hope one day, I'll retrofit ACC

You have the Connection between?

10 minutes ago, Cairus said:

You have the Connection between?

No, I had disassembled the R242 camera to check something else and on the connector, I only have one pair of CAN Extended wires (the ones that go to J519)

Don't tell me that just adding these 2 wires makes ACC work ?

You need them

3 minutes ago, Cairus said:

You need them

I can add them, it's not difficult.

But I don't understand the way. Can I contact you in MP to have more information Cairus ?

I did make one mistake, though. I apparently had a different car in mind regarding ACC without unit 16. Scala will have it as soon as ACC is available. Sorry for my incorrect information on this.

MP?

5 minutes ago, Cairus said:

I did make one mistake, though. I apparently had a different car in mind regarding ACC without unit 16. Scala will have it as soon as ACC is available. Sorry for my incorrect information on this.

MP?

MP : Message Privé (in french) Private Message

No problem for the information, although I admit that I would have been happy to be able to install the ACC without all that to do 😁

What you need?

So, i found Kamiq 2023 with ACC on my Server...

Unit 16:

Hardware-Nummer

5Q0953569F

Hardware-Version

100

Software-Nummer

5Q0953521MG

Software-Version

0275

Seriennummer

20240124500556

Lange Codierung

6404

Unit 13

Hardware-Nummer

2Q0907819

Hardware-Version

H03

Software-Nummer

2Q0907567B

Software-Version

0534

Unit 09

Hardware-Nummer

2Q0937090F

Hardware-Version

H15

Software-Nummer

2Q0937090F

Software-Version

0982

Unit 03

Hardware-Nummer

2Q0614517CB

Hardware-Version

H20

Software-Nummer

2Q0614517CP

Software-Version

0120

Unit A5

Hardware-Nummer

2Q0980653A

Hardware-Version

H19

Software-Nummer

2Q0980653G

Software-Version

1505

Unit 19:

Hardware-Nummer

3Q0907530BA

Hardware-Version

542

Software-Nummer

3Q0907530BB

Edited 17 October, 202517 Oct by Cairus

So my installation is correct? I kinda got lost in the discussion