i've been on to miltek for an exhaust for the fabia vrs, at the moment they don't do one. if a few of us keep asking they might sort one out.

[email protected]

Basically they need 10 firm orders before they will develop one... altho i presume that the system would also fit the Ibiza TDi and the pending Polo GTTDI.

If we can get 10 orders I can organise it through work as we are a Milltek outlet/supplier.

They would also consider doing a decat pipe.

i would be very interested in one, i'd be looking for a full system from turbo back with decat.

Perhaps it is time to see how many peeps would be interested. I'm certainly interested and I know a few on the Midlands meet today were too!

What could you expect from the Miltek performance wise? and how much would you be looking at fitted?

D

I've spoke to Milltek and we have sourced a car hopefully to help move this along, no minimum orders needed here guys as I know there's plenty of you that'll go for it

Fitting would be about an hour (

I'll be interested in one later this year

I've spoke to Milltek and we have sourced a car hopefully to help move this along, no minimum orders needed here guys as I know there's plenty of you that'll go for it

Fitting would be about an hour (

Out of interest. How long does the development work usually take on a exhaust system?

I hope its not a case of just making a replica and guessing the size of pipe to use.

Is this an option for you lot? http://www.edelstahl-auspuff.de/remus/image/duplex/skoda.jpg

A little too Max Power imho, Q

Nearly went for one of those on my old 16v! Instead, I went for the hooge 6x4 upswept single, like the below pic. Wouldn't suit the vRS though due to the single, contoured exhaust cut-out in the bumper.

Going to be in contact with Milltek tomorrow and my car may be going to a fit with a view to producing a exhaust and decat for the Fabia vRS.

All depends on us or AwesomeAPR providing one, but looks like they will have a few to choose from, either way we should have something available soon.

Any thoughts on tailpipe?

I was thinking oval as per std as that seems to suit the rear bumper cutout.

I think stick with the oval, but maybe get rid of the 2 peashooter holes from inside it!

same here Ross, oval. do you think they will go for the full de-cat version?

I'd be up for an oval that nicely hugs the cutout on the bumper

The Leon R type Trim would be ideal... as would a twin a-la 20vt miltek items

Well my car is all booked in on the 24th Feb for a decat and Milltek system with an oval tailpipe.

Be three days up there while they make it and then back to us and on the rollers

Cant wait

Well my car is all booked in on the 24th Feb for a decat and Milltek system with an oval tailpipe.

Be three days up there while they make it and then back to us and on the rollers

Cant wait

Your not the only one who can't wait!

Keep us updated on the progress mate.

Will do

Any idea on what it will look like from the rear ?

Any photoshoppers out there willing to make a guess?

Hopefully it wont look to different from standard.

Could go for a 4x3 oval which should be about right I think.

Heres one on a mates Zafira they did last week

What do you think?

will it be ready for sale when yours is done Ross? i want to get one on myself then get my car up to your place to get my 1 click custom remapped.

Tom.

Mmmmmmmm

Meaty

Me wants