Ok I had a DV relocation kit fitted a few months back but after fitting I had lost almost all the induction noise :confused:

I had the Carbonio on and it was quite loud.

I was told this was normal so did not think much more about it.

Now after all my 17705 problems I decided to remove all the Samco pipes along with the Carbonio and fit the metal ABD CAI & ABD TIP.

This was all done yesterday along with some other hoses (Pressure)

I still have the 17705 :( & not much induction noise :confused:

Forge 007 also fitted!

Just to add I can now hear more of a humming noise (probably turbo spool up)

Any ideas or anything I should check?

alomost sounds like a leak some where. but then again you might not be able to hear it over the blueflame exhaust.

justa thought, get a mate to drive it while you hand out the passenger window and see if you can hear it there.

When my n75 pipe had split nearly clean through, no error codes came up.

When posting on here i was told i would only get a code when it was emmision related.