dustrat

Thanks for your reply. The radiio has been fitted to pre 70s classic car and is working perfectly ie radio, sat nav and wired up to reversing sensors.Have also fitted upgraded aerial. What i need wiring configuration to install phone module.Robert

I have an Admundsen + RNS 315 which I took out of my early Yeti that was written off a few years ago. Because of damage to drivers side I was unable to get comple wiring from telephone module under drivers seat and had to cut wiring. I want to put complete radio and module into a non Skoda car but need to know wiring connection of module. . The module VW part number is 3C8 035 730D and has a multi plug with 8 wires as well as a red plug that I think is an aerial plug. Any help with wiring would be appriciated or if anyone knows where I can buy harness

I know this an old post but may be some can help. I am fitting an Amundsen + RNS315 radio to 73 VW Karmann Ghia and need some help wiring telephone module. I got the radio out a Skoda that I had that was written off Got radio out ok and identified the wiring but because of damage to front of car was only able to get module and cut wiring .Can any one supply me with wiring diagram .There is a multi plug with 8 wires and separate red plug . There is a VW part number on module 3C8 035 730D. Any help appriciated

Thanks for very 'PROMT' replies . It seems that I kept my finger on the locking section of key too long and that is what caused windows to open with out me noticing . I'll be more carefull from now on. Thanks again all for replies. Robert.

Parked my 2016 Skoda Yeti up last night and locked it only to find all windows open this morning but car still locked !! Any one else had this problem?

I fiited these to cure problems with DRL's

Try fitting these to wiring going to bulb ,should cure your problem, did with mine. eBay item ( 152770345494 )

I have a Amundsen + RNS315 that I took out of my 2010 Octavia and put back standard radio before replacing with a Yeti.I want to fit this radio to a classic car that I have. As Skoda can not supply me with wiring sockets that go into back of radio I will have to sorce from breaker. The problem that I have is that I will need a wiring diagram to see where wires from sockets go, preferably coloured. Can anyone help please? Robert

I have a 2016 1.2 Automatic Yeti that I am very pleased with but would like to change the DRL bulbs to LED.It seems that some models do have LED DRL bulbs fitted as standard.The daylight running lights are part of the main headlights . I have had the fitted bulbs out and they seem to be twin filment small baynet bulbs. Has anyone come across replacement LED bulbs and if so have you got part number. Robert

My 2016 1.2 DSG Yeti came with out spare wheel only 'repair kit'. Over weekend managed to get a new full size alloy wheel and new tyre from a former owner of a Yeti. Has anyone come accross a lift up cover for full size spare wheel or is DIY job?. The chap I bought it off gave me a bracket to fit wheel standing upright but it means that I have to remove the boot cover that is attached to tailgate. Robert

Having owned a Suberb and until today a Octavia (both automatic) today I stole a Yeti !!! Well not exactly stole but bought a 2016 Yeti 110bhp 1.2 automatic with 4561 miles on clock from Skoda main dealer at a very good price and even got £40 petrol FOC. From I gather it is an Ex Mobility car that has not been used for a year. Any problems with car, yes, its white but at price I got it at I don't care. Its got 9 months Skoda warrantee left plus an extra 3 months from dealer.Pick it up on Wednesday after it has full service.

I have a 2010 1.9 diesel SE automatic and have been having heater problems for some time now. Passengers side footwell and windscreen vents temperature working OK but drivers side only luke warm. No problems with thermostat or water pump , reaches 90 degs (normal) and does not use any water.Any ideas please.

I have heater problems with my 2010 1.9 tdi DSG for some time now. Passenger side side footwell temperature OK but drivers side just warm when switch turned to max . Fan working OK, windsceen vents both sides OK. Water temperature runs at 90 degs and even fitted after market grill blind

Problem solved. Should have read the handbook. There is a reset button under wiper stork which did the trick. Still don't know what caused the problem in the first place but working OK now. Robert

Ive got a 2110 Octavia SE FL 1.9 TD and it has just developed a problem with maxidot . Went out on Sunday after the car had been standing for 2 weeks and miles per gallon reading was working but on Monday reading did not cancel at start of new journey. Every thing else on maxidot working OK.Would disconnecting battery and leaving for a couple of hours solve this problem ? Anyone else come accross this problem ? Robert