Skip to content

andreiro221

Members
  • Joined

  • Last visited

Everything posted by andreiro221

  1. sw 1941 is for Octavia 4 maximum SW for you is 0742. try a factory reset for MIB
  2. this is not correct. Scala/ Kamiq/ Fabia made from kw 5/2024 do not have yet activation outside factory.
  3. i don.t thnik you got the correct firmware. 469 is update to 741+742 - the last official firmware for your hardware. you are trying to update direct to 1800, a version for different hardware.
  4. for the MY 24 and MY25, the Kamiq FL has traffic sign recognition, WITHOUT navigation system. It is based on GPS and internet data from OCU unit.
  5. you can get 1800 if Samsung does not connect on Android Auto.
  6. no need to go to dealer You can become main user very easy. Just follow onscreen instructions. and you need both keys
  7. lack of power and smoke from Exhaust does not come from glitch electronics.... try to find out from AA guy what were the error codes . Scantools have history logs and it should not be difficult. The DLAA engine is quite good , very reliable.
  8. 741 is incomplete firmware. Right after the update to 741 you start update to SW742....
  9. the update was released in 24 december 2024 it will update the PDC unit to SW581/582 also there is un OTA update for MIB, SW1985. Remember you have to be registered as main user in MIB, otherwise you will not receive the update
  10. you need to scan for errors. if you have error B200049 - Faulty control unit, you need to remove the OCU unit, it is behind the light switch, and replace the back-up antenna part 5WA998058C if you have error B20004B or B200047 it is about SW update or entire OCU unit replacement
  11. andreiro221 replied to MickA's topic in Škoda Kamiq
    the SOS unit in the car ( VW calls it OCU unit) has an eSIM, which is used to comunicate with the Emergency service. It runs on 3G an 4G mobile networks and also provides internet for Skoda Connect. The OCU also has GPS tracker to send the car.s location when needed.
  12. the piece that you need is a 10£ antena in the SOS unit.
  13. you can update safely to 0741 and then 0742
  14. the adblue you put in it bad you need to empty the adblue tank and refill with OEM skoda adblue, G 052910M4 after 2-3km , the errors will reset by themselves
  15. because 17xx is NOT for your unit. You should have stopped at SW742
  16. you tried to update a SW that is not for your unit. your 2019 Scala has maximum SW742 you were warned not to update to 17XX/1800 because there is no way to recover if something goes wrong
  17. that feature "rear shock absorption" comes from the PR numbers every car has, basically every major part of the car that gets mounted on the conveyor in the factory has a specific code so it is not a feature, it is a component. PR code is 3 character alphanumeric code that describes equipment of a car. in the above exemple, the rear suspension is UA5, basic shocks. If the car has, for exemple, Sport suspension, the code would be different to describe the sport shocks, but the name woud still be Rear Shock Absorption so , someone from Skoda UK wanted to make a list of features and they simply did copy/paste from the vehicle identification information.
  18. the fuel pump has a module next to it, which is supplied with power from fuse and is triggerd by the ECU, so you can.t bypass the relay, because there is none. the most effective way is to disconnect the pipe from the high pressure fuel pump, then get to the tank fuel pump plug , identify the 2 power wires (+ and -) and supply 12 v from the battery. the 2 wires are thicker , yellow/white and blue/grey first you need to remove the ISOFIX covers. the rear seat has 2 hooks on the front and you have to pull hard up, with both hands. after you release the seat, you have to push a little to the back to release the seat from 2 other hooks in the back
  19. iti is very simple. If the DVD-player is still in good condition, you have to buy a special DVD and you can update the maps easy. If the DVDplayer does not read dvd-s, you have to make a bootable CD and a SD card .
  20. there were some Kodiaqs that came with a naivagtion screen, but no hardware for the naivgation, an it gave the message "navigation unavailable" you can send me the VIN so i can check the hardware installed in the car
  21. how did you unlock Smartlink? at the dealer with license? 150 euro?
  22. it can be fixed with a piece of good quality fuel hose. you have to remove the plastic corrugated pipe and replace with rubber hose
  23. there is a know issue with the clutch master cylinder and the clutch operation is jerky Ask the dealer to replace it

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.