Fabia vrs led front fog into Octy vrs

[radders567]

So do you get any bulb blown warnings. When I used a 50w 6ohm I got a bulb blown warning.

[Danvrs09]

No don't get any warning lights

[reverse]

Guys, sorry for the maybe ignorant question - will the cornering function still work after the swap? 

[radders567]

Yes it does.

[4WDDSG6]

Yes it does.

Hello my friend , tell me please When you used a 50w 6ohm do you have any faulse or warning lights in dash panel??

regards

vv

[radders567]

When using just a resistor I used to get a bulb blown warning. I ended up wiring in 5w side light bulb holders. This was the only way I could get the warning light not to illuminate.

[pip_vrs]

Is the plug the same for p-fl and fl for foglights?

Im putting these fogs onto my pre-fl just wonderin if i'll need a new plug

[silver1011]

Not sure but the receptacle on the back of the LED DRL's is different to the original plug on both the pre-FL and FL Octavia's so either way a little wiring work is required.

[ryan-re]

How are you going to mount them? Have you made an adaptor bracket of somesort?

[pip_vrs]

Me? i have a facelift front.. just having time to fit it lol.

I need the DRLs too but can find them anywhere :(

[ryan-re]

Ah i see. Was gonna say they wont fit a pre-fl as the mounting points are different

[Damnmister]

Dan, thinking of doing this myself. Do you have a link for the wire harness you used please?

[Paulbrown]

Can't you just replace the normal bulb with leds?

[Damnmister]

Yeah you could, but there would be a bulb out warning!

[Paulbrown]

Can you get canbus ones then?

[ryan-re]

Never seen any, might be able to use those resistors with cables ready to attach tho which you get with some hid kits

[Damnmister]

I think the ones below should work, in conjunction with fabia vrs fog lights.

The below cables seem to be the same used by danvrs09,, anyone help?

http://m.lightinthebox.com/en/2pcs-hb3-hb4-led-turn-singal-resistor-50w-6ohm-canbus-error-free-for-bmw-audi_p2505724.html?currency=GBP&litb_from=&adword_mt=&adword_ct=84187195634&adword_kw=&adword_pos=2o1&adword_pl=&adword_net=g&adword_tar=&adw_src_id=1810908567_301579154_21687113474_kwd-78632005276&gclid=CLn-jt3q-scCFUUOwwod5v4I-A

[radders567]

May be the way to go then.. I might have to look into this a bit more, still surprised to find no one who has actually done this on a 2007 model VRS

 I have an LED unit for sale in the for sale section with a cracked front glass if you are still interested in having a look at this mod to see if you can get it sorted out.

[stig1]

I've been fitting mine today and they wouldn't fit without a bit of trimming around the hole

[silver1011]

Take lots of pictures, there are plenty of people on here who would love a step-by-step guide!

[radders567]

 I have an LED unit for sale in the for sale section with a cracked front glass if you are still interested in having a look at this mod to see if you can get it sorted out.

Still available to anyone who wants it.

[stig1]

I'm ordering some wiring with 50w 6ohm resistors fitted so ill see what I can do when I know it works

[stig1]

Fitted and all working

[silver1011]

But no pictures!?

[Such]

Did anyone manage to get a guide with what to do with the wiring, and part number for new plug needed?

 

Thanks