vrs Replacing rear brake disc dirt plates

[Chickenstu]

Can anyone tell me if this is an easy enough job? 1 has come loose so thought I'd replace the both rears before it starts coming in contact with anything.

 

Happy enough if it's a case of removing caliper, carrier and disc but anything more technical and I would it done at a garage!

 

Also, be great if someone knew the part number for these (rear left and right) for a 2007 VRS 2.0TDI

 

Thanks in advance

 

 

[Chickenstu]

In reply to my own question, I'm thinking these would be ok? (listed as splash panel halfway down)

 

http://www.bestpartstore.co.uk/skoda-octavia/laura-1z3/26623/10730

[07 vRS Taxi]

Removing the discs can be a difficult DIY . The carrier is held on by two M14 Spline head bolts that are torqued to 90nm + 90 degrees.

Edited 11 May, 2014 by 07 vRS Taxi

[Aspman]

It's a hub off job on the back. I've had both rear hubs changed in the last year for ESP issues and had the guards done at the same time.

[Chickenstu]

Cheers...will get the garage to do it then!! In next week for Service and Timing belt so may as well throw some more cash at them!!

[mikey vrs]

I need to replace both my rear back plates soon,are they a dealer part only? 

[Aspman]

Link above ^^^^^ has them. Dealer is about £20 a side.