Skip to content

New VRS 245. OBDeleven not activating high beam assist

Featured Replies

Hi. I have just taken delivery of a new VRS and on trying to activate high beam assist I got a 'not supported' message when using the app. I had no problem with the outgoing VRS. Has anyone had the same problem and I'd do how did they sort it out? Car definitely has the required modules; lane assist and dynamic headlight control 

The app probably isn’t changing the right things. The coding is different depending on the model year. 

This is what I used to code on my VRS245 (18')

 

Procedure:

  • Ensure light switch is off
  • Conduct a soft reset when accepting each change
  • Reset Light menu to factory settings after coding to display new menu option

Controller 09 - Central Electrics
Security Access - 16: 31347

Adaptations  - 10
- Search for Fernlicht to narrow down the options
- Menusteuerung Fernlichtassistent Werkeinstellung: Set to PRESENT
- Menusteuerung Fernlichtassistent: Set to PRESENT
- Erwiterte Fernlichtsteuerung: Set to AFS: FLA: FERNLICHT UEBER AFS
Menu option for "Light Assist" should be available in the Lights section of the Car settings menu (may require a factory reset of Light menu).

 

If you want HBA to remain active, with light switch in Auto, then code the following
- Fernlichtassistent Reset: Set to NOT ACTIVE

 

Controller A5 - Front Sensor
Coding (using experimental coding values)

-Byte 19, Bit 0-3 (00 FLA_Additional_High_Beam,no_Additional_High_Beam

-Byte 19, Bit 4-7 (20 FLA_Headinglight_Type,LED)
-Byte 21, Bit 5-7 (20 AFS_coding_Light_Assist,High_Beam_Assist)

 

Controller 4B - Multifunction Module
Coding (using experimental coding values)
-Byte 11, Bit 6 (High Beam Assistance,Enabled)
 

You may get an error pop up regarding Headlight Range Control. To clear this, go to Controller 4B, Basic Settings.
-Basic Headlamp setting -> Go
-Acknowledge basic setting -> Go

 

As above ^^^ i followed these steps and got my HBA working on my 245.

 

i did have to do this twice as I forgot to switch the lights of from auto the first time sonit didn’t work! 

  • 2 months later...
On 11/01/2019 at 09:25, ElliottLW said:

This is what I used to code on my VRS245 (18')

 

Procedure:

  • Ensure light switch is off
  • Conduct a soft reset when accepting each change
  • Reset Light menu to factory settings after coding to display new menu option

Controller 09 - Central Electrics
Security Access - 16: 31347

Adaptations  - 10
- Search for Fernlicht to narrow down the options
- Menusteuerung Fernlichtassistent Werkeinstellung: Set to PRESENT
- Menusteuerung Fernlichtassistent: Set to PRESENT
- Erwiterte Fernlichtsteuerung: Set to AFS: FLA: FERNLICHT UEBER AFS
Menu option for "Light Assist" should be available in the Lights section of the Car settings menu (may require a factory reset of Light menu).

 

If you want HBA to remain active, with light switch in Auto, then code the following
- Fernlichtassistent Reset: Set to NOT ACTIVE

 

Controller A5 - Front Sensor
Coding (using experimental coding values)

-Byte 19, Bit 0-3 (00 FLA_Additional_High_Beam,no_Additional_High_Beam

-Byte 19, Bit 4-7 (20 FLA_Headinglight_Type,LED)
-Byte 21, Bit 5-7 (20 AFS_coding_Light_Assist,High_Beam_Assist)

 

Controller 4B - Multifunction Module
Coding (using experimental coding values)
-Byte 11, Bit 6 (High Beam Assistance,Enabled)
 

You may get an error pop up regarding Headlight Range Control. To clear this, go to Controller 4B, Basic Settings.
-Basic Headlamp setting -> Go
-Acknowledge basic setting -> Go

 

thanks for this, what do you mean by a soft reset between each step? use the reset on the app? or switch the ignition off?

i dont have 'factory reset' in my lights menu, only the whole csr menu?

 

Just reading this.

 

Are you guys saying that HBA is a  hidden freebie??

 

Or did u need to spec it from the factory?

1 minute ago, Ursicles said:

Just reading this.

 

Are you guys saying that HBA is a  hidden freebie??

 

Or did u need to spec it from the factory?

you should be able to activate that and TSR if you have the high spec camera (which a think all UK cars have, for lane assist, so if'youove got lane assist, you SHOULD be able to turn it on with OBDeleven or VCDS, but I'm having issues!  

I think i do as i have an 18 plate 245 .... ill start looking into this OBDeleven thing a little bit!

3 minutes ago, Ursicles said:

I think i do as i have an 18 plate 245 .... ill start looking into this OBDeleven thing a little bit!

I'll let you know if i get it working, It seems most of the forum users have!

I'd argue its not hidden freebies though. Its VAG holding things back on purpose unless we pay huge sums of money, like blackmail! The car can do it, they just disable it in software unless we pay them!

1 minute ago, Robbijay said:

I'll let you know if i get it working, It seems most of the forum users have!

I'd argue its not hidden freebies though. Its VAG holding things back on purpose unless we pay huge sums of money, like blackmail! The car can do it, they just disable it in software unless we pay them!

It's known in the trade as "Treat them mean and keep them keen".:biggrin:

1 minute ago, shyVRS245 said:

It's known in the trade as "Treat them mean and keep them keen".:biggrin:

it should be know as "treat them mean and they'll F**k off to hyundai/kia instead!"

 

(Ignore me, I'm still grumpy from looking at the Porsche options last month...)

Edited by Robbijay

4 minutes ago, Robbijay said:

it should be know as "treat them mean and they'll F**k off to hyundai/kia instead!"

 

(Ignore me, I'm still grumpy from looking at the Porsche options last month...)

Don't they still charge £200+ for cruise control on a £45,000 car?:wall:

10 minutes ago, shyVRS245 said:

Don't they still charge £200+ for cruise control on a £45,000 car?:wall:

exactly! £45k for a cayman i can tolerate. I'd have a cayman. but it should come with everything that bloody octavia comes with as standard! I don't want much, just CC/carplay and electric seats!

28 minutes ago, Robbijay said:

you should be able to activate that and TSR if you have the high spec camera (which a think all UK cars have, for lane assist, so if'youove got lane assist, you SHOULD be able to turn it on with OBDeleven or VCDS, but I'm having issues!  

All UK spec vRS's maybe, but not all UK spec Octavias :sadsmile:

8 minutes ago, Robbijay said:

exactly! £45k for a cayman i can tolerate. I'd have a cayman. but it should come with everything that bloody octavia comes with as standard! I don't want much, just CC/carplay and electric seats!

Just been on the Porsche configurator with the same engine as my Octavia and to the same spec ended up costing £54,137 compared to mine at £28,100. The Porsche is obviously heavier, slower and uses more fuel oh and road tax of £450 per year for the first 5 years.:thumbdown:

But a rich man like you can afford it. :)

 

 

23 minutes ago, TheWanderer said:

But a rich man like you can afford it. :)

 

 

No way I'm paying more than £140 a year for road tax, much too tight.:D

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.