Skip to content

MIB question

Featured Replies

  • Author

Hello @SashaGrace,

I have purchaised my FL AMUNDSEN and these days I`m looking forward to give it. Do you have an video or some instructions how to displace the old one and fit the new one. Thanks in advance! 

Best regards, Nik! :)

I don’t, but it’s very easy. There are 4 slots on the radio screen (on the new screen these are covered by the lower trim) and you must put a radio tool in each and pull the screen away. Unplug the 2 plugs, shave the connector down on the rounder of the 2 plugs and plug the new screen in and click it into place.

  • 3 weeks later...
  • Author

@SashaGrace, hello!
I recieved my screen. Mounted, it is working, but in the upper right corner of the screen have a lots of bubbles or dots, I can`t distinguished. Is it necessery to install new software version or this is screen problem. The screen working properly at whole! 

66842425_666748427133790_506530159214460928_n.jpg

Аnd @SashaGrace I did not shaved the conncetor, becuse it plugged full correct. 

looks like water marks between the glass and digitiser, we have a lot of touch screens in work and it looks very similar, id ask for a refund of keep it and get a substantial amount back...

 

are they more noticeable on a white back ground? 

  • Author
1 hour ago, JohnnyType2 said:

looks like water marks between the glass and digitiser, we have a lot of touch screens in work and it looks very similar, id ask for a refund of keep it and get a substantial amount back...

 

are they more noticeable on a white back ground? 

Yes they are. On a white background they look alike orange. Now I am trying to vaporise it. Will post the effect after the procedure. :)

38 minutes ago, Skodafabian said:

Yes they are. On a white background they look alike orange. Now I am trying to vaporise it. Will post the effect after the procedure. :)

 

sounds like someone spilt their fanta while driving. 

  • Author
4 minutes ago, JohnnyType2 said:

 

sounds like someone spilt their fanta while driving. 

Haha yes but it is not :D. Thats the pic from it. 

0839D126-223E-4889-8004-8C03AD9374D0.jpeg

FDD569B2-937B-4D2C-B590-4804E81FD67F.jpeg

  • 1 year later...

Hello, newbie question. What does MIB stand for?

Thanks in advance.

 

10 hours ago, Scallystev said:

Hello, newbie question. What does MIB stand for?

 

The German is Modularer Infotainment Baukasten which loosely translates as Modular Infotainment Platform/Toolbox.

Thank you, all I got through google was the predictable Men in black I and II.

Steve

 

So i can fit an upgraded full glass 8" screen from FL octavia to my car, without any coding needed? Picture of my MIB.

What part number m I lookig for for the screen?

IMG_20201008_155350.jpg

Edited by Motion

  • 4 years later...
On 21/06/2019 at 14:29, Skodafabian said:

Many thanks for the information! When i get it and fit it I will post pictures with the results! 

Best regards, Nik!

On 21/06/2019 at 14:13, SashaGrace said:

It is compatible, it’s an FL Amundsen display, it’s not a Columbus one. Plug and play with just one plug locator to shave down.

Hi I have a 2013 Skoda Octavia which had the amunsden system in it. I have swapped this for the 2018 605M screen but am not sure what Multimedia box i need to make it work, as my current one seems to not work. Any help would greatly be appreciated. @SashaGrace

19 hours ago, MK9205 said:

Hi I have a 2013 Skoda Octavia which had the amunsden system in it. I have swapped this for the 2018 605M screen but am not sure what Multimedia box i need to make it work, as my current one seems to not work. Any help would greatly be appreciated.

A 2013 Octavia will have a MIB1 Amundsen which has different screen resolution to a 2018 screen for a MIB2 - they are not compatible.

Hi,

Do you know which multimedia box would be compatible. Il have to purchase one so I want to make sure I buy the right one.

20 hours ago, MK9205 said:

Hi,

Do you know which multimedia box would be compatible. Il have to purchase one so I want to make sure I buy the right one.

@pab567

First of all pls share VIN because there might be more systems affcted than just multimedia unit.

Hi,

TMBBJ7NE6D0015398 - Vin.

I believe the old system is an Amundsen. The upgrade is the 605M screen which i have installed.

Thank you for your help.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.