We currently on rebuilding my fabia mk1 vrs and looking for info on upgrading the brakes as we will be running about 320bhp I've been looking at porche boxster brakes I know we have to put a conversion kit to allow the fabia to take these brakes.

 

However I've also been looking at seat leon cupra R 4 pot brakes would these also need a fitting kit?and if so where could I find it?

 

Any help welcome 

Thank you all.

Would you consider doing 312mm brakes from a mk1 octavia vRS?. Apparently they're a straight swap with 288mm brakes (i.e vRS brakes) Would be cheaper than porsche brakes I suspect.

Only problem I'd still single piston where porche and Leon supra r have 4 pot which has more stopping power 

2 minutes ago, DomHunter said:

Only problem I'd still single piston where porche and Leon supra r have 4 pot which has more stopping power 

I think theres a fabia with porsche brakes in the project section? I want to say its Lofty's yello fabia that has them.

I wouldn't like to go too big, without looking at the master cylinder. I don't know if a bigger one is available to swap in on the mk1 Fabia.