Hi all, need to change out the inner tie rods on my Fabia Monte MK2. On looking at on auto doc and euro car parts, both are coming up with different overall lengths for the tie rods. Euro car parts states the length at 275mm for every brand available. Auto doc the length ranges from 275-315mm 🤷‍♂️.

Does anyone know the correct length for the Monte? On a side note, Euro car parts seem to only list inner tie rods for racks without PAS 👀 seems a bit odd.

 

Cheers

Isn't Monte Carlo the trim spec?

 

You have a Mk2 Fabia, I assume you have PAS, why are you looking at tie rods for non-PAS?

It's a default search on euro car parts, it only comes back with parts for non PAS for some reason. I put my registration number in so why this is happening is very odd

its because their parts search V vehicle type is rubbish.

 

It always helps to provide the year of manufacture / engine type of your vehicle when asking for parts help.

 

As you can see by the link below..........there is no different lengths on vehicles with PAS.

 

https://skoda.7zap.com/en/cz/fabia/fab/2013-697/4/423-423043/#13

Edited 30 January, 20224 yr by UrbanPanzer

4 minutes ago, UrbanPanzer said:

its because their parts search V vehicle type is rubbish.

 

It always helps to provide the year of manufacture / engine type of your vehicle when asking for parts help.

 

https://skoda.7zap.com/en/cz/fabia/fab/2013-697/4/423-423043/#13

Makes no difference, same results show up, all I need it the correct length then I can just order them.

well, to be sure, ring the dealer and ask for part numbers REF your VIN.

 

I dont think there is any different lengths on vehicles with PAS

 

Just put my vehicle in Eurocarparts, only one type, no lengths or diff lengths available with PAS, only without PAS when it's 275mm.

Edited 30 January, 20224 yr by UrbanPanzer

13 minutes ago, UrbanPanzer said:

well, to be sure, ring the dealer and ask for part numbers REF your VIN.

 

I dont think there is any different lengths on vehicles with PAS

 

Just put my vehicle in Eurocarparts, only one type, no lengths or diff lengths available with PAS, only without PAS when it's 275mm.

Just ordered some from GSF came up straight away, 315mm long for vehicles with PAS. Sorted 

Did those inner from GSF fit? I hate ECP for the same reason, always different fitment detail it's annoying. I went to GSF for lwoer ball joints, one size and fit, same for track rod ends which are to be fitted saturday but thought I'd get the inners too and having the same dilemma with sizes. Thanks