Dreaded looping

[Rumbeard]

It's C14+ and the original firmware as shipped according to the label was 6270

 

Hardware H23

 

 

Edited 14 November, 2022 by Rumbeard

[varooom]

5 minutes ago, Rumbeard said:

It's C14+ and the original firmware as shipped according to the label was 6270

 

Hardware H23

 

 

Well I do have this available then if you wish to try it.

 

S00.1000.07.99

 

#Integrationphase: Delivery cw45/13 C14-samples
#VwSwPartNumber:1T0035680T/3T0035680S/7F0035680D
#/7E0035680D/1T0035680R/1T0035680S/3T0035680Q/3T0035680R/1T0035686G/1T0035686E/1T0035686F/7F0035686A/7E0035686A/3T0035686K/3T0035686H/3T0035686J/7N5035686A/2H0035680A
#VwSwIndex:6276/6276/6276/6276/6276
#AppsBuild:C_EU_33.276_t1 C14

[makman]

@Carl248do you have a link to the seller on Ebay as i am looking to upgrade my Swing radio to a Bolero or better.

[Carl248]

Hi mate...his ebay user name is rcd310...guy called Eric.

 

Carl

[Rumbeard]

On 14/11/2022 at 21:44, varooom said:

Well I do have this available then if you wish to try it.

 

S00.1000.07.99

 

#Integrationphase: Delivery cw45/13 C14-samples
#VwSwPartNumber:1T0035680T/3T0035680S/7F0035680D
#/7E0035680D/1T0035680R/1T0035680S/3T0035680Q/3T0035680R/1T0035686G/1T0035686E/1T0035686F/7F0035686A/7E0035686A/3T0035686K/3T0035686H/3T0035686J/7N5035686A/2H0035680A
#VwSwIndex:6276/6276/6276/6276/6276
#AppsBuild:C_EU_33.276_t1 C14

Thanks worked better than expected.  Original HD OK and boot splash split fixed too.  I found a local guy who said I could get a VCDS backup cam re-enabled as the SWL disabled it.

[ricwebb]

Hello.... I am new to briskoda and have only just seen this stream. I have a similar problem with a slight variation! Over the last few months the unit seems to have degraded. Sometimes slow to start, then maps stopped working and finally a black screen with a message swl initialisation in progress which then loops for ever and nothing else works. I was told that the hard drive was faulty so got it replaced. Tried the reset by using the 3keys and got message to insert cd which I tried but couldn't as dvd drive now locked!! It has now been suggested that the mother board is faulty but before I scrap the unit does anyone have any other suggestions? My unit is ...686N with dab etc...