Skip to content

Auto start / stop inversion!

Featured Replies

Any thought please!

Now new battery has led to auto start / stop working as designed, so now looking to "invert" the start stop so function "off" on start but can be turned on by operating button.

To clarify, I don't want to permanently disable the function, just tired of residential estate driving where stops at all junctions whilst momentarily stationary!

OBD11 was a gem on son's A6, the facility exists to invert the switch within the menu's, works a treat.

Yet on the Superb facility not offered!

Can this be done outside of the OBD11 menu's?

Is there a facility to extend the time on stationary before auto stop cuts in?

Switch inversion cables on Ebay, are these any good? For £22 seems good but from China (had previous issues!) and would value any experience of the cable / supplier.

TIA.

**** Snow.

Get urself a Start-Stop Memory module - does exactly wat ur after.

 

A few of us have done it, including myself.

Highly recommended.

 

Much better option than permanently disabling the Start-Stop function entirely using OBDEleven or VCDS.

It’s easy to get in the habit of turning off start/ stop by pressing the button when starting the car, and if you do want it to work if held up at temporary traffic etc it’s just a matter of pushing the button as required.

47 minutes ago, Kenny R said:

It’s easy to get in the habit of turning off start/ stop by pressing the button when starting the car, and if you do want it to work if held up at temporary traffic etc it’s just a matter of pushing the button as required.

My habit is starting the car and literally saying “turn that @“£&@“ off”

 

So OP if you can get into a habit of turning it off it’s much cheaper and easier 

I had kept in mind that memory module only keeps the S&S state at engine shut down for the next start.

 

Is there really another module configuration that simply inverts the default configuration   (S&S off at every engine start. Comes on only when button is pressed)?

3 hours ago, Bap33 said:

I had kept in mind that memory module only keeps the S&S state at engine shut down for the next start.

 

Is there really another module configuration that simply inverts the default configuration   (S&S off at every engine start. Comes on only when button is pressed)?

 

It should do that already.

I'm pretty sure u've setup ur Start-Stop Memory module incorrectly.  They have 3 or so settings/modes, which dictate their "memory" function.

 

Mine is setup so it retains the last state, no matter engine being turned on/off.

11 minutes ago, JR RS said:

I'm pretty sure u've setup ur Start-Stop Memory module incorrectly.

They have 3 or so settings/modes, which dictate their "memory" function.

 

Actually, I haven't. Since... I don't have any memory module installed... 😁 

I was just trying to remind what I had read here and there... ;)

 

Thanks for clarifying, this may be very useful for other Mk3 owners... ;) 

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.