For the SD card it's not coding but copying modified files. You have to use old maps which have designation to do it. Here Maps allowed you to do it. Once TomTom did the cartography for the mib2 standard they left out the flexibility to use Inrix. Here Maps had it in. Mib2 height, it's coding so you can use the latest maps.

If you are good with file copy you can do it yourself with the mib2 standard. I run with two cards in the car with the mib2 standard and swap as it takes my fancy between the latest maps, no traffic reports and the old maps with traffic reports. Oid maps have old speed limits in them naturally and roundabout with extra exits now are short of some.

Think pcbbc is adding some... notification came up.

2 minutes ago, pcbbc said:

I’m in Orpington SE London. Or one day a week at the office in Horsham. I’m assuming you have MIB2 Columbus system and so just require the TMC coding via VCDS.

Well he's been asking about mib2 standard unless he has a mib2 high as well.

Had a thought may be he's got a mib1 trying to fit mib2 standard files onto a mib1 card... in that case coding for TMC would work but not the mib2 standard maps...

Need a picture of the info screen to resolve I reckon.

Sorry, been very unwell, will start again once feeling better. Fabia 2019 not Columbus unit, Admunson unit from new and not touched.

FC

Effected the UK where the TMC provider that VAG used stopped broadcasting traffic reports. Inrix in the UK continues. Columbus model can be coded to swap the channels to pickup Inrix. Admunson mib2 the guys here worked out a fix for that but you have to use old Maps, Here Maps, they had the flexibility to do this via updating a sequence of modules... overwriting the map file.

The solution is on thid thread. I have reproduced on the SeatCupra board in one place.

TMC UK Solution

Traffic Master discontinued their UK RDS broadcasts of traffic information which VAG cars used in April 2023 for TMC, solution exists by shifting reception to the alternative UK broadcaster of traffic management data, Inrix.

Click for the Mib2 High Fix

Click for Mib2 Standard Fix

For mib1 standard or high follow the Mib2 high fix. Just needs VCDS / Obdeleven code change. Mib2 standard doesn't need coding. See the relevant links.

Mib2 high is a Columbus

Mib2 Standard is an Admunson in Skoda terms.

Full credit to those involved. All info is on the Skoda thread but mashed up with chit chat and getting there. Vag aren't going to fix this issue. It was clear from early on.

Edited 19 May, 20251 yr by Tell