Hey Guys. I'm changing my radio in my Mk1 Fabia to a double DIN radio. But the plug in from my old aftermarket radio isn't the same! That's not a problem as I was given a cable that plugs into my radio but needs soldering on. So I will cut the old aftermarket radio adapter which plugs into my black and brown OEM cables, to solder on my new cables. But the trouble is I need to know what colour in my OEM matches my new cables. I hope that makes sense. 

 

For example on my OEM I need to know which colour is live,ground, speakers etc. If someone could provide me with a diagram of sort or a instructions saying what cable does what would be great! See attached a photo of my instructions for my new cables. If someone could provide one similar for the fabia id be greatful

https://www.briskoda.net/forums/topic/196288-oem-wiring-loom-colours-pins-for-stereos/

 

2 minutes ago, Breezy_Pete said:

https://www.briskoda.net/forums/topic/196288-oem-wiring-loom-colours-pins-for-stereos/

 

I looked at that and while it was helpful it was also a tad confusing especially with the live cables 🥹

How so?

The two wires that are black with blue stripe are permanent 12V, the wire that is brown with red stripe is only live when key is in ignition.