Skip to content

Canton Subwoofer to Aftermarket Sub and Amp

Featured Replies

Hi everyone, hope i'm not bothering anyone with my questions, and if the topic is in the wrong section the admins will be kind and move it to the correct one.

I have recently bought a MY15 Octavia III Combi with the Canton Audio System and like most of Canton owners i'm pretty dissapointed with the stock bass from the Sub (my other Octavia, a 2005 with stock sound system is better than this šŸ˜… ) so naturally i went for an upgrade with a full kit from Hertz, 12 inch sub capable of 1000w and Hertz Amp, i also bought a Hi/Low adapter ACV 30.5000-22 ( the lc2i was a little bit expensive for my budget at the moment) and started working.

I fed all the cables to the Hertz amp, but now i have a problem, i get no audio signal from the original Canton sub's connector, if i connect the original sub, it works but as soon as i disconnect it and connect the audio cables from the Hi/Low converter to the original connector it stops working.

Does anyone know the solution to this? I will leave a few links and photos with everything i purschased for the upgrade and i'm sorry if my english was a bit rough.

Amp and sub : https://hertz-audio.com/product/dp-2-200/

https://hertz-audio.com/product/car-audio-subwoofers-dieci-ds30-3/

Hi/low converter : https://www.soundhouse.ro/accesorii-audio/adaptoare-de-semnal/adaptor-high-low-acv-305000-22-2-canale-remote-150w-rms

  • Administrators

Your english is fine ;)

I've moved the topic to audio, hopefully someone will know ;)

  • 1 year later...

Just in case someone is interested: I have been running a JL Audio 10TW3-D4 (2x4 ohm) sub for a year hooked to the Canton sub channels. Works perfectly, no problems whatsoever and enough bass for me. I have cranked the stereo to the max and no issues. The enclosure is a car-model-specific from basser.pl. Installing 10TW3 to the enclosure requires some modification to the speaker hole, the original has to be enlarged a bit. Additionally, the mounting flange needs to filled up with plywood. I also took the trouble or lining the inside of the enclosure with 50/50 mixture of sand and poly resin. This made the walls rock-hard.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.