Can someone confirm if these front dampers are the correct ones i would need for my car which is a 2023 superb 2.0 diesel estate 200bhp.

Also would i need to 'programme' these in with VCDS or equivalent coder?

Thanks .

The Monroe one? Autodoc seems to have it down as the correct part.

Pretty sure no coding is needed through VCDS. Only thing that will be needed is calibration. Get the car up in the air, let the wheels hang free (and suggest keeping the wheels on to make sure the shock absorber is extended and then run the calibration process so the controller understands the extremity of shock absorber travel.

How do you calibrate? Dont you need vcds to input the new data?

Cheers for the info re parts Auto doc seem way cheaper then anything in the UK, but you do have to wait ( which im prepared to do to save 100s)

DCC Recalibration can b done with OBDEleven and apparently VCDS too.

Definitely VCDS but also OBD11 and I think I’ve read Carista too.

The big pity about the Monroe seems to be build quality. I had a front start to leak at about 28k miles/4 years.

7 minutes ago, travs said:

Definitely VCDS but also OBD11 and I think I’ve read Carista too.

The big pity about the Monroe seems to be build quality. I had a front start to leak at about 28k miles/4 years.

Mine started to go at 60k or just over.

But the prices above compared to TPS is around £450 cheaper so i can live with it if they go bad again.

Need to order VCDS or OBD11 - cant decide which one yet tho ..think the later is subscription though?

8 hours ago, JR RS said:

DCC Recalibration can b done with OBDEleven and apparently VCDS too.

According to that it says it can't be done with VCDS?

Thats strange .

3 hours ago, MP74 said:

According to that it says it can't be done with VCDS?

Thats strange .

That's because when I created those instructions at the time it wasn't possible via VCDS.

I've never got confirmation that it has been done successfully via VCDS, so I haven't updated my instructions.

Nonetheless, the steps r essentially the same, just different interface.

3 hours ago, JR RS said:

That's because when I created those instructions at the time it wasn't possible via VCDS.

I've never got confirmation that it has been done successfully via VCDS, so I haven't updated my instructions.

Nonetheless, the steps r essentially the same, just different interface.

Ah got ya ...cheers .