pab567

They are right - this is normal behavior when unit is exchanged. What is the exact model number of software version of unit you installed?

Check your PM

I have no clue if this unit support RVC, sorry...

@RABAH has SWING, I cannot help with SWING.

P&P although additional QuadLock adapter (from old 40-pin to new 52-pin) and new USB is required. Climatronic visualization doesn't work in MIB STD2 PQ.

This is either Amundsen (RNS510) or Amundsen+ (RNS315). As you mentioned that there is no BT module under the seat then this must be Amundsen+ (RNS315). Unfortunately I have no firmware for it. If you are going to use this car for next couple of year I fully agree with @langers2k regarding MIB STD2 PQ.

Let me know model number and software version of your infotainment unit.

Visit your local Skoda dealer... but I really doubt they will be able o help you if your car was installed wih unit taht was not supporting these features.

You must have not only FEC/SWaP 70400 activated but also xml that manages it uploaded to the unit to get ICC (In-Car Communication) activated. All requesters check your PMs.

Same as for previous request - It's NOT possible to upgrade from 03xx to any other than 03xx using regular update. To achieve it unit must be first hacked and then flashed using firmware with specially modified metainfo.txt. This is definitely NOT a piece of cake and I do not recommend to make it to anyone who is not fluent in QNX and does not understand what is the impact of changes he is doing.

... and extra harness to have it all connected

Visit your local Skoda dealer...

Columbus MIB2 does NOT support VC :( so either you have to switch to Columbus MIB2.5 and 9.2" screen 5E0919606 or switch to Amundsen MY18 (5Q0035874C / 5Q0035864C) as it supports VC and then you can remaing with current screen.

No updates for Yeti - there are units with newer software but nobody has this software available as update. @mantask check your PM

FEC for Drive Mode Selection is insatlled in gateway. You have it inactive becasue adaptations were not setup properly - look for adaptation channel with word "charisma" and have it enabled.

Check your PM but I really doubt it helps :(

PM

Bad news. Typical root cause for such behaviour is faulty eMMC. There is a special procedure, called emergency update, that might help - the problem is that I don't hae any frmware for your unit and I kno nobody who has it :(

Check your PM @RomanB it looks that files are again not available...

It's NOT possible to upgrade from 02xx to any other than 02xx using regular update. To achieve it unit must be first hacked and then flashed using firmware with specially modified metainfo.txt. This is definitely NOT a piece of cake and I do not recommend to make it to anyone who is not fluent in QNX and does not understand what is the impact of changes he is doing. Software 04xx for SKODA PQ does NOT exist at all. I have NOWHERE found 03xx software update for SKODA PQ, if anyone has it pls contact me on PM. Everybody is looking for it... or any other 03xx for SKODA PQ

As there are multiple versions of Bolero pls share exac model number.

AppConnect cannot be unlcoked with SW upgrade - either contact your VW dealer or the unit must be hacked.

Nope, this unit, as well as 820, does not support SmartLink (neither RVC) :(

@Bilsaf79 link sent via PM

Link sent via PM