Everything posted by pab567
-
Superb sat nav positional accuracy issues
Message sent
-
Superb sat nav positional accuracy issues
Probably GPS antenna is faulty - try any other, e.g. the cheap Chinese internal GPS antenna. If this doesn't help then I recommend to reset navigation calibration data - it can be done only with diagnostics interface, e.g. VCDS. Then you should drive a straight road approx. 1 km. Unfortuntely message with sw download link cannot be sent - probably @Gyp has mailbox size exceeded.
-
Unused port in the back of radio
MOST (optical databus), not used in Fabia but used in other cars that can be equipped with the same infotainment unit (Octavia, Superb, Kodiaq, Karoq)
-
Columbus Radio Install
Yes - although I would rather think anout MIB STD2 PQ than Columbus RNS510
- Vrs 2015 looking to swap out the stereo
-
Amundsen MIB2 Firmware Update
I've heard about SW 0480 from someone but so far have not seen it. All check your PMs.
-
Amundsen MIB2 Firmware Update
Nope, this is the latest version.
-
Parking sensors not working after installing android multimedia
Looks like your infotainment unit does not support displaying of 4 side sensors.
- Vrs 2015 looking to swap out the stereo
-
Numpty causes mayhem with infotainment system.
MIB1 Amundsen 5E0035874A + display 5E0919605D. I beleive you can buy second hand set for max. 150 GBP + cost of replacement by yoir Skoda dealer another 150 GBP. But if it's broken then being in your shoes I would think about retrofitting Amundsen MIB2 - with 6.5" screen you can have such set installed for approx. 350 GBP.
-
Is it possible to retrofit steering wheel controls?
Let me know your VIN so I can check what is your infotainment system
-
Numpty causes mayhem with infotainment system.
If your car is 2013 then I cannot imagine screen cost of 900+ GBP... pls share VIN so I can check
-
Intermittent Bluetooth????
Have you checked another phone?
-
Amundsen MIB2 Firmware Update
Unfortunately I don't have it :(
-
Replacing Columbus with Kenwood Headunit
I have gone this way with DNX525DAB and I was not happy with it. Why don't you retrofit Amundsen MIB STD2 PQ unit from yeti FL?
-
I need Bolero Update :-)
Check PM
-
Amundsen MIB2 Firmware Update
Although updating unit from 02xx (so called SOP2) to higher SW is possible however it's not just a simple update - it requires unit to be hacked first and then reflashed with especially modified final SW. Moreover, from my experience I do not recommend for units installed in SEAT LEON 5F to go higher than SOP3 as then you might be affected with some incompatibility between infotainment unit and BCM that requires adjusting of coding and adaptation of BCM while from the features point of view going higher than SOP3 does not bring any new features. Unfortunately all I can share with you is latest official SOP2 SW - you have download link on PM.
-
Amundsen MIB2 Firmware Update
Check your PMs
-
Amundsen MIB2 Firmware Update
PM
-
Infotainment thicko needs help!
If SmartLink is not active then you have either to contact your local Skoda dealer for having it activated or the unit must be hacked.
-
Amundsen MIB2 Firmware Update
Itr's rather HW than SW issue. Of course you may reflash the unit with latest SW just to be on the safe side but first you must send model number and current SW version - long press SETUP then SYSTEM INFORMATION. All others check your PMs
-
Infotainment retrofitting
Nope... MIB2 pre-lift versions have green backlight. Only facelfited versions (MIB2.5) have white backlight
-
I need Bolero Update :-)
All others check your PMs
-
I need Bolero Update :-)
Need model number, e.g. 5Q0035840A, and current SW version, e.g. 0245.
-
I need Bolero Update :-)
5Q0035819x and 5Q0035820x unit do not support SmartLink, you must have glove box unit exchanged.