AGFalco

Try to light it. Diesel won't ignite on it's own. Petrol will. Thanks. AG Falco

Last car I bought was discontinued within 6 weeks. Ordered end of July. Discontinued in early September. Delivered in late October. Talk about cutting it fine. Thanks. AG Falco

As you can see mine is a 2018 one, hence the difference. Hope you sort them out. Thanks. AG Falco

Different from mine then. They are similar to the front mud flaps I fitted to my 2023 VW UP. Except you put screws in to the holes. Thanks. AG Falco

From memory:- Three plastic clips. drill hole first, push clip in then push/tap in centre bar to lock in place. One Metal spring clip:- Line up and push/tap in to place. Thanks. AG Falco

Details in this post when I fitted them:- Thanks. AG Falco

White grease is good. Thanks. AG Falco

Any Petrol in the fuel tank, with the Diesel? Thanks. AG Falco

Re a quote from 'Rooster' I believe. Thanks. AG Falco

AC in EV's also have a different oil/lubricant in the system. Thanks. AG Falco

Is it still under warranty? Thanks. AG Falco

If you PM me the Registration Number I will check if anything is on ERWIN for you. Thanks. AG Falco

Ask @pab567 Thanks. AG Falco

Which version of Android are you on. I changed up to a newer phone and the newer version of Android. I have had no disconnections since. Thanks. AG Falco

Check your MOT history here:- https://www.gov.uk/check-mot-history Thanks. AG Falco

Prova a chiedere in inglese! Try this. Hi everyone, I assembled the radio today, connecting the CAN bus and everything else.. the radio worked well too, only that after a few hours of use the writing "component protection" appeared and now I can no longer use it. Does anyone know how I can solve it? Thanks. AG Falco

This might help ' ADAMPK' Hello everyone, I'm opening this discussion because I received my 2017 Skoda citigo radio today. I have a 2014 Skoda citigo and I wanted to fit it to finally get Bluetooth and give my citigo a more modern look. I saw that the speaker connections are almost the same, my doubt is this: how do I connect everything else correctly? I saw that the CAN bus and power connections are completely different. I would like to thank anyone who can help me in advance. I attach the links I have available below. My current connections: the connections of the radio I purchased. I add the codes on the radio below to make the model I purchased clearer (the one I would like to fit):

It looks like the rubber is BEGINNING to separate from the metal outer ring. Have they been advised on the last MOT? Wants to be on the shopping list but they don't look like they need doing now. Not as bad as mine when change them last year. See below:- Thanks. AG Falco

For wipers, but for washers try Fuse 39 Bottom row. 5 in from the left on your photo. Thanks. AG Falco

You asked for a photo which answered the question. 😀 Thanks. AG Falco

Some people find them hard to change. There is a cover inside the inner wheel arch plastic liners that pulls off. This can help with changing them. Shout if you get stuck. Thanks. AG Falco

You DON'T have the type of headlight unit that you have circled. You have the 4 H7 headlight projector bulb type units with the LED DRL / side lights. The two inner ones that you can see are the main beam ones in the reflector. The two outer ones are behind the projector lens are the two dipped beam ones. You cannot see the bulbs from the front of the car. You need to remove cover E to get to the dipped beam bulbs. See my finger pointing to the drivers side cover here. These are underneath the wing / bonnet area as opposed to in the engine bay. Thanks. AG Falco

How many wires are on the connector that fits on the bulb/bulbs? What about a photo of your headlight units? See below for the two types of headlight units:- So back to my question? Thanks. AG Falco

That's an H4 bulbs with three connectors on the back, and two filaments inside, like this:- Thanks. AG Falco

So the two outer H7 bulbs are the dipped ones, and the two inner H7 bulbs are the main beam bulbs. Have you tried to swap the dipped bulb with the main beam bulb? Is there any voltage in the double connection for the outer dipped beam bulbs? Thanks. AG Falco