East_Yorkshire_Retrofits

https://eastyorkshireretrofits.co.uk/products/02-03xx-to-04xx?_pos=5&_sid=db1082cd9&_ss=r

Yes it's possible, 0480 is the latest release now

Probably worth checking wether your car has outstanding TPIs for software updates, as most of the software faults across the car have been ironed out now

Usually yes. There's one or two odd ones that can't

No, you'll require a new steering wheel control module/clock spring & additional wiring

It depends on what is currently fitted, as there's two possible manufacturers which aren't interchangeable

We're currently offering a price reduction on our Cruise Control retrofit for the mk3 Octavia. https://eastyorkshireretrofits.co.uk/products/octavia-iii-genuine-cruise-control-system-ccs?_pos=6&_sid=5036e9af4&_ss=r

You need to code the Canbus gateway so it's aware the KLR is installed Can't comment on the coding issue you're having as I've never used obdeleven

This isn't compatible with MQB-Evo as the gateways are different. You may get away with fitting it elsewhere as it only requires power, ground & connection to the correct lin-bus. However the MQB-evo KLR modules are different so I'm unsure how you'd get on

Easiest way to tell once installed is just by the output on screen. Take a picture of that and the camera itself 🙂

We have customers regularly travelling from the extremes of the country 🚗 Skoda say this because they can't do it. Dealers are extremely restricted in the scope of their work Please send us a message with your VIN 🙂

This is exactly how the system would look and operate from the factory 🙂

2021 Skoda Octavia fitted with Blind spot assistant Cross traffic alert We have previously fitted this car with a genuine reversing camera www.eastyorkshireretrofits.co.uk facebook.com/Eastyorkshireretrofits

You don't have to use an SVM adapation document It just means if the Canbus gateway or the infotainment unit is returned to the factory configuration by a dealer for any reason then you'll need to redo the coding in that module. Not the end of the world

Personally I wouldn't be using aftermarket cameras with a brand new car (or any car) The aftermarket ones for MIB3 interrupt the video supply to the display, as the genuine cameras send video via ethernet

Yes it's possible to install it However if their parts system says there isn't a kit available for it then it's no can do as it's impossible for them to parameterise the camera without an activation document (unless they get technical support involved and they'd likely say no because it's not an "approved" modification - ie not a Skoda kit). They'll also struggle to code it as the majority of dealers, including master techs aren't capable of doing much with ODIS outside of guided functions

When removing the trim on the end of the dash, if the tech is an idiot then it's possible to pop the airbag switch open and this would then allow them the chance of reassembling it incorrectly 👀 However why they'd take that trim off to replace a module above the driver footwell I'm unsure

Skoda Octavia 3.5 fitted with LED headlights, including self levelling All completely error free, looking & operating as if factory fit 🤙 We have previously fitted this car with; •Powerfolding mirrors •Multicolour front & rear footwell lighting •Multicolour front & rear door card lighting •Virtual cockpit •Sports displays

No FEC needed for speed limiter 👀

Reviving an old thread for anybody who may come across this and wonder what the answer is Speed limiter can be enabled by fitting new stalks and 30 seconds of coding. No FEC required for it 🙂

Unfortunately dealers have to do things strictly by the book resulting in the answer of not possible

We can't help you with VCDS alone sorry. You need access to a VAS6154/6154A The wiring you've put a screenshot of doesn't mention the camera at all. Where have you wired the camera to?

Use a genuine camera

What diagnostic equipment do you have? Where have you connected your wiring? What coding have you done?

Canbus & ethernet. Far from plug and play It's important that the camera contains the correct dataset for the car - these cameras are extremely sensitive about this It's also important that the camera, infotainment unit & Canbus gateway are all coded correctly & that the ethernet connection is in the correct port on the gateway. The gateway & infotainment unit have SFD