igrozan

No problem... https://www.drive2.ru/l/587595782509559952/

Everything can be done/changed. But honestly, I don't remember all the details... I can send you a link to the instructions, but they're in Russian. The image was adjusted to match the car's appearance.

I did the same thing

Before 2019 AID is 3VD920790, without a letter. After 2019 comes 3VD920790A! It is very important. There will be a different immobilizer. This is what I bought, a 2018 model year car

Unfortunately, I have no information on the F block. If this parameter does not have an effect, then I cannot help. For block 5Q4959593E Software version 0032 Odis: (Vcds will be similar) Block 09: Adaptation: Code: 31347 [LO]_Signalisierung_Spiegelanklappung - [VN]_not_active OBD11: On-board network control unit 09 → Secure access (Login: 31347) → Coding: Access control - Signalisierung_Spiegelanklappung: Activate I haven’t tried it via OBD11!!!

I activated it on these blocks, but haven’t tried it on others. 5Q4959593E Sup 2017, 5Q0959593E Tiguan 2018, 5Q0959592K Tiguan 2020

Yes, yes, I understand, if you are not afraid to cut the door trim with a knife and you understand at least a little about auto electrics, I can give you all the links to spare parts.

What version do you have for 42 blocks?

I bought flashlights, connectors, pins on Ali. I did the wiring. To install, you need to remove the door card and, worst of all, make a hole for the light. At the same time, cut into the ambiline wiring and code it. Nothing complicated😁 If there are blocks in the rear doors, then you can easily illuminate the passenger exit area.

On all S3 mirrors open after the alarm is removed, they can easily be changed to open after ignition.

Can be enabled only if there is a 360-degree camera view

If this is about the trunk lid, I made my own 2018 model

got it from here https://vi.aliexpress.com/item/1005005345672636.html?spm=a2g0o.order_list.order_list_main.51.2cab1802TWBNo7&gatewayAdapt=glo2vnm + connectors, wires and pins

Extended ambilight

This means that the auto closing did not activate! When washing, when the key is nearby, the water activates the sensor on the door handle.

I studied this question for a long time, but never found an answer. I know for sure that the Skoda Enyaq has this from the factory. We need to get a scan of block 9.

https://github.com/olli991/mib-std2-pq-zr-toolbox Here you can find out whether it is suitable for MIB or not

Yes, that's right. This only works on MIB 2.5.

Here I changed the image in the "Car" menu

The main thing in MIB was navigation. Then the toolbox is installed. The patch is stitched and the swap is transferred. Everything is working.

2.0 tdi, super sport🤣. I did it on my car.

If you don’t have any options, but you set them, it doesn’t change anything

You have version 028E, I have this parameter. It's good that everything works.