boomsly

octavia is 19 mm

wait a minute a k04 1.8t remaps to a little over 260 anyways, a ko4 hybrid is a bit more again, i think he is either confused or trying to pull a fast one, ko3 hybrid would be the power hes suggesting i think.

i was watching it at the last 2 mins then my missus started talking to me so i forgot to bid

keeping my eyes on this, i just missed on on ebay for £40 :(

im sure thats a minor detail

after looking through that i would say its a distinct posibility that they will

that was a load of crap

seen a few of these before, personally i think they are funny as ****

sorry i couldnt resist

i had to read that twice to work out wtf you are on about :no:

edit:double post

cool, now i just have to work out how to remove all my trim without snapping anything :wonder:

when mine said that i took out the cd cartridge and put it back in after removing and replacing the cd's again, its never happened again either

because it looks like thats a tuned evo that your comparing too, you dont know the gearing, revs,spec of turbo or anything else about that car so its not a good basis for comparison

nice brakes, nice wheels not so nice dirt

if yu have only had problems since the clutch was fitted i would check to see that all the earths are on properly and that there are all the connectors actually connected

thanks to all the above comments i think i have an answer the car will be lowered so yeah bumps and stuff will be a problem sweedish yeah i should like the look more but only doing it as the paint on the bumper is bad i might aswell go for an upgrade while im there

that all sounds very promising to me, i spose it doesnt help that i will be also fitting a LCR lip thingy then

lol i comment just as you edit grrrrr

he cant use unit 18

:wonder:

so the mounting hole are already there!! how easy is that ill just copy the little holes from bumper to bumper for the squirters then bolt it all up almost sounds to easy, whats the catch :wonder: edit:spelling

im toying with the idea of putting a vrs front bumper on my octy 4x4 but i want to retain my headlight washer jets. i know octimarks 4x4 had them on still but he isnt sure how it was done. does anyone know how or what is entailed to fit them to the vrs bumper cheers

i use a pin to adjust washer jets normally, put the pin in the jet hole aim it and then squirt away. keep adjusting to suit edit:spelling

i have heard that before nd believe it can be, if it cant i wont be doing mine lol