Even if you found the parts are you sure you can code the functionality of the washer jets?

If you can find the answer to that then you can go ahead and buy the parts which will probably be:

Jets, jet caps, new and bigger washer fluid bottle, wiring loom, bumper or unless you want to cut yours.

My problem is that i can not find the part numbers for this retrofit, i look in ETKA and i could not find everything.

 

Have you any idea how can i find those part numbers ?

Your next option is to find the vin number of a car that has the factory jets and provide that to a dealer to give you the numbers of the parts otherwise they will not be very helpful. 

Been a while... not much going on besides swapping the Sport diffuser with the carbon one from BT.

Much wider and beeffier than the old one. Since I lose the fog light which was on the previous diffusser I have one more modification to do, will update soon as I get the parts.

 

 

 

 

 

 

Edited 18 July, 20187 yr by 32KOFDATA

I Just love your fabia, its perfect in every way and i dont know where you get all of your ideas to with the car hahahaha

18 minutes ago, NcioxDSG said:

I Just love your fabia, its perfect in every way and i dont know where you get all of your ideas to with the car hahahaha

 

Thanx man!   I probably should spend less time on the internet. 

Edited 18 July, 20187 yr by 32KOFDATA

Nice mate. Although couldn't have been cheap if it was from BT. Yikes. That site is extortionate. Look more agressvive for sure 

39 minutes ago, Nandovee said:

Nice mate. Although couldn't have been cheap if it was from BT. Yikes. That site is extortionate. Look more agressvive for sure 

 

Initial price is indeed extortionate, that is why I didn't bother even though I knew these parts existed since the launch of the Fabia RS MKII.

If you search further up the posts I have a link where I got mine from. Much, much cheaper.

That looks amazing

Since my new diffuser is made out of carbon I hate the idea to drill it and install a rear fog light as I had before.

 

So I went searching online and found a niftty solution to my problem. It is a set of bulbs that got both white and red LEDs.

Only thing I need to do is install them in the reverse light chamber, as normal, and then run the extra wire for the red LEDs to the fog light power cable.

 

You can find them on ebay and elsewhere as "white/red switchback leds."

 

 

 

 

 

Edited 20 July, 20187 yr by 32KOFDATA

On 18/07/2018 at 09:28, 32KOFDATA said:

 

Initial price is indeed extortionate, that is why I didn't bother even though I knew these parts existed since the launch of the Fabia RS MKII.

If you search further up the posts I have a link where I got mine from. Much, much cheaper.

Care to say how much cheaper?

16 hours ago, Filipelol said:

Care to say how much cheaper?

 

I got it for 180euros. from here: https://www.spoilercentrum.cz/produkty/bt-difuzor-zadniho-narazniku-skoda-fabia-II-hatchback-carbon/

Unfortunately it is not in stock as it seems cause the page has been removed :(

Is it dead yet? ...no it ain't.  I've been doing major changes exterior/interior wise (nearing completion) and I've already started on the engine.

I've decided a long time ago that this little car will be with me for the long run.

Just a taster of things to come. 

 

 

Complete Dark Interior (thanks Ant!)

 

 

Black painted rear interior dome light

 

 

Black painted W8 front interior dome light

 

 

 

Tinted side markers

 

 

Raceseng Shifter

 

 

Various carbon exterior trim (Bennett)

 

 

 

 

 

 

Custom carbon wing mirror caps

 

 

Tinted fog lights (Depo)

 

 

Rear view camera

 

 

Wider (+2.5cm) Muecke front fenders

 

Details on the mirrors 🤑

Did you get the bennet kit from the 3rd party czech dealer rather than from bennet themselves? They quoted me for the kit last year and I never went through with it....regretting it now.

 

How are the parts for quality?

And how did you manage to remove that spoiler from the tailgate and did I spot an RTMG blow off valve?>

Edited 28 January, 20206 yr by Mickmartin

17 hours ago, AMD87 said:

Details on the mirrors 🤑

 

https://www.spoilercentrum.cz/produkty/skoda-fabia-2-tuning-karbon-kryty-zrcatek/

5 hours ago, Mickmartin said:

Did you get the bennet kit from the 3rd party czech dealer rather than from bennet themselves? They quoted me for the kit last year and I never went through with it....regretting it now.

 

How are the parts for quality?

 

4 hours ago, Mickmartin said:

And how did you manage to remove that spoiler from the tailgate and did I spot an RTMG blow off valve?>

 

Indeed I got the carbon parts from Spoilercentrum.cz - they still had some parts in stock and got them for a good price.

They were actually half the price in relation to the Bennett prices online. The quality is superb as well as fitment - all made from actual carbon fiber sheets.

As it seems for now I will not be using the side trims and front spoiler lip - not looking as I hoped for on my Fabia Sport bumper and Monte Carlo trim.

 

The spoiler was removed by a friend of mine who has a paint shop. He used a cool gadget that when placed against the car heats up the silicone but not the trim itself which then comes right off. 

Indeed it is an RTMG blow off valve. Well spotted. 

Aw nice one,  I had been in contact with someone at spoiler centrum and the prices worked out at:

 

£150 for the spoiler

£133 for the door guards

£185 for the rear diffuser.

 

My plan was get the spoiler and rear diffuser only and paint them, However now I've seen those wings from Muecke…….I WANT! Obviously you are closer for a quick delivery but how long did delivery take?

5 hours ago, Mickmartin said:

 

https://www.spoilercentrum.cz/produkty/skoda-fabia-2-tuning-karbon-kryty-zrcatek/

 

less than £100 🤔

 

probably have the issue with postage I’ve had lately from CZ.  

16 hours ago, Mickmartin said:

Aw nice one,  I had been in contact with someone at spoiler centrum and the prices worked out at:

 

£150 for the spoiler

£133 for the door guards

£185 for the rear diffuser.

 

My plan was get the spoiler and rear diffuser only and paint them, However now I've seen those wings from Muecke…….I WANT! Obviously you are closer for a quick delivery but how long did delivery take?

 

The Bennett parts came in after a week and half. The Muecke wings are made to order. They need a week to be made and then they ship them out. If I remember well I received the wings after two and a half weeks.

17 hours ago, Mickmartin said:

Aw nice one,  I had been in contact with someone at spoiler centrum and the prices worked out at:

 

£150 for the spoiler

£133 for the door guards

£185 for the rear diffuser.

 

My plan was get the spoiler and rear diffuser only and paint them, However now I've seen those wings from Muecke…….I WANT! Obviously you are closer for a quick delivery but how long did delivery take?

Strictly static seem to be the uk supplier. 

Picked up the car last week from the paint shop.

 

Back and front fenders are now wider by 2.5cm

installed and modified the monte carlo trim to fit the new fenders

smoothed out the bumper

repainted hood

repainted rear bumper

repainted flaking wipers

installed new rear wing and carbon attachment

installed carbon mirror covers

and now waiting on the side trim made of carbon to be installed.

 

Need to sort out the stance and get myself some new wheels to fill the massive gap.

Here is a pic of the car at the mo but will get better ones plus pics of the process soon as I sort out the above details.

 

This project its on a league of it's own. Lovely to say the least.

 

What else do you plan for the car, engine wise? I think you never showed tha exhaust manifold, currently planning on make one, and because the 1.4 16v is mostly the same as the 1.6 16v that im running, or this is going turbo? 😮

On 26/01/2020 at 15:46, 32KOFDATA said:

Is it dead yet? ...no it ain't.  I've been doing major changes exterior/interior wise (nearing completion) and I've already started on the engine.

I've decided a long time ago that this little car will be with me for the long run.

Just a taster of things to come. 

 

 

Complete Dark Interior (thanks Ant!)

 

 

Black painted rear interior dome light

 

 

Black painted W8 front interior dome light

 

 

 

Tinted side markers

 

 

Raceseng Shifter

 

 

Various carbon exterior trim (Bennett)

 

 

 

 

 

 

Custom carbon wing mirror caps

 

 

Tinted fog lights (Depo)

 

 

Rear view camera

 

 

Wider (+2.5cm) Muecke front fenders

 

Hi, Love reading through this build thread. I was just wondering, where did you get the black interior pieces from? Thanks